1) Secure a Classy Brass template to a light source (a light table
or window) with a small piece of tape or other temporary adhesive.

2) Rub waxed paper on the back surface of the card stock so the
stylus will glide more smoothly and to help prevent tears in the paper.

3) Place the paper or card stock face down over the template, positioning it so that you'll have the image where you want it.

4) Using the stylus tool, press the paper through the open areas of the template to produce your raised image.



  • When dry embossing a large open area, press only around the edges of the template, not the entire open area.
  • If a colored raised image is desired, replace the brass template on
    the raised side of the card stock. It will act as a mask to protect the
    un-raised surfaces. Apply color from ink pads or Stampin' Pastels using
    a small sponge or sponge dauber.