Jun 25, 2019 | Flowers, Friends, New Products, Shop, Spring, Stampin Up |
Floral Essence Butterfly Card

All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamp Sets – Floral Essence Bundle [151055], Butterfly Gala Photopolymer Stamp Set [148580]
Card Stock – Rococo Rose 8-1/2″ X 11″ Cardstock [150882], Whisper White 8-1/2″ X 11″ Card Stock [100730]
Stamp Pads – Garden Green Classic Stampin’ Pad [147089], Rococo Rose Classic Stampin’ Pad [150080], Pretty Peacock Classic Stampin’ Pad [150083], Seaside Spray Classic Stampin’ Pad [150085], So Saffron Classic Stampin’ Pad [147109]
Misc.- 2019–2021 In Color 6″ X 6″ (15.2 X 15.2 Cm) Designer Series Paper [149617], Blender Pens [102845], Twine Baker’s Whisper White [124262], Gold Faceted Gems [144141], SNAIL Permanent Adhesive [104332], Glue Dots [103683], Fine-Tip Glue Pen [138309], Dazzling Diamonds Stampin’ Glitter [133751], Stamparatus [146276], Butterfly Duet Punch [148523]
Measurements:
• Rococo Rose: 5 ½” x 8 ½” , 4 ½” x 2 ½” , ¾” x 2 ½”, scrap piece for flowers
• Whisper White: 4 ¼” x 2 ¼” , plus scrap piece for butterflies
• Rococo Rose Designer Series Paper: 4” x 5 ¼”
Instructions:
1. Fold Rococo Rose card stock in half to create card base.
2. Glue Designer Series Paper layer to front of card.
3.Stamp stems & leaves with Garden Green ink pad and stamp onto 4 ¼” x 2 ¼” Whisper White card stock layer. Pull colour in with blender pen.
4. Ink sentiment with Rococo Rose ink pad and stamp onto ¾” x 2 ½ piece of Rococo Rose card stock. Glue to Whisper White layer.
5. Wrap White Twine around stamped card stock, securing in the back with glue dot and tying a bow on the top. Glue Whisper White layer to 4 ½” x 2 ½” Rococo Rose card stock and adhere to the front of the card.
6. Next, ink the flower with Rococo Rose ink pad and stamp onto a scrap piece of Rococo Rose card stock. Repeat three more times. Cut flowers with Perennial Flower punch.
7. Lightly mist each flower with water and crumple slightly and glue two together. Repeat. Glue the flowers to front of card and place a gold gem in the centre of each one.
8. Stamp butterflies with Pretty Peacock ink pad for the outline. Stamp the bold images with Seaside Spray and So Saffron ink pads. Cut with Butterfly Duet punch. Repeat with the small butterfly so that you have two small and one large butterfly. Stamp body with Pretty Peacock ink pads. Glue to card. Stamp antennas with Pretty Peacock ink.
9. Lastly, add Dazzling Diamonds Glitter to the wings of the butterflies using the Fine-tip Glue Pen.
Mar 15, 2019 | Flowers, Friends, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
Create this card for your forever friend. Everyone has that special someone who is their person. This is the perfect card for that occasion. Another reason is just to tell them how important they are to you. It’s nice to know that you can count on someone when you need them. You can also let them know.

All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamp Sets – Incredible Like You (148708)
Cardstock – Night of Navy (100867); Call Me Clover (146969); Pineapple Punch (146971); Whisper White (100730)
Stamp Pads – Call Me Clover (147139)
Misc. – Happiness Blooms Designer Series Paper (DSP) (148795); Night of Navy Medium Baker’s Twine (146336); Butterfly Duet Punch (148523); Layering Circles Framelits Dies (141705); Stampin’ Dimensionals (104430); Mini Stampin’ Dimensionals (144108); SNAIL Adhesive (104332); Mini Glue Dots (103683); Paper Snips (103579)
Measurements:
• Night of Navy: 8 1/2” x 5 1/2”; scrap for butterflies
• Call Me Clover: 4” x 4”; 2 1/2″ x 5 1/2″
• Whisper White: scrap for die-cut
• Pineapple Punch: scrap for die-cut
• DSP: 1 1/4″ x 4”
Instructions:
1. Score Night of Navy at 4 1/4″; fold to create card base.
2. Adhere DSP to the card base with SNAIL.
3. Punch 3 sets of butterflies from small Call Me Clover pane and adhere randomly to square Call Me Clover panel with Mini Stampin’ Dimensionals. Trim butterflies with Paper Snips to align with edges of cardstock panel. Attach to card base with SNAIL adhesive.
4. Stamp sentiment with Call Me Clover on Whisper White scrap; die-cut with circle framelit.
5. Die-cut scalloped circle from Pineapple Punch scrap; adhere behind sentiment with SNAIL adhesive. Adhere layered sentiment to card front with Stampin’ Dimensionals.
6. Punch 2 small butterflies from Night of Navy scrap; adhere to the layered sentiment with Mini Glue Dots.
7. Tie 22” of twine around card front.
Mar 14, 2019 | Flowers, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
You can create some beautiful country butterflies for friends and family with the supplies listed below. The soft color and background embossed floral design go perfectly together. I also love the black outline of the butterflies because it makes them pop off the card. It’s created with the Beauty Abounds bundle.

All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamps: Beauty Abounds (148726), Beauty Abounds Bundle (150617)
Stamp Pads: Tuxedo Black Memento (132708)
Paper: Petal Pink (146985), Basic Black (121045), Sparkle Glimmer Paper (146957)
Misc.: Butterfly Beauty Thinlits Dies, Country Floral Dynamic Textured Impressions Embossing Folder (149698), Multipurpose Adhesive Sheets (144106), Big Shot Die-cutting Machine (143263), Basic Adhesive-Backed Sequins (146933), Dimensionals (104430), Mini Dimensionals (144108), SNAIL Adhesive (104332), Mini Glue Dots (103683), Big Shot Die Brush (144262), Paper-Piercing Tool (126189)
Measurements:
• Petal Pink: 5 ½” x 8 ½” score at 4 ¼” for card base
4” x 5 ¼”
• Basic Black: 4 ¼” x 5 ½”
4 1/8” x 5 3/8”
• Grapefruit Grove Foil: 4” x 5 ½”
• Multipurpose Adhesive Sheet: 4” x 5 ¼”
And here is the inside of the card:

Instructions:
- Peel the white backing off of the adhesive sheet and adhere it to the 4 ¼” x 5 ½” piece of Basic Black card stock (for more precise alignment try peeling off the upper half of the backing, placing the upper part of the adhesive sheet on the top of the black cardstock, then peeling off the rest of the backing once you know it is straight).
- Cut the large butterflies top layer die from the Basic Black card stock with the adhesive sheet on the back.
- Cut the underlayer die of the large butterflies from the Sparkle Glimmer Paper. Use the Die Brush and the Paper-Piercing Tool to remove all of the excess pieces from the die and the paper.
- Peel the backing off of the Basic Black Butterflies – remove any little pieces that did not come off when you removed the backing.
- Adhere to the Basic Black Butterflies layer on to the Sparkle Glimmer Butterflies layer.
- Insert the 4” x 5 ¼” piece of Petal Pink into the Country Flowers Embossing Folder and send it through the Big Shot with one cutting pad.
- Carefully cut off two of the butterflies to put on the inside of the card.
- Stamp “For You” in Tuxedo Black inside the Petal Pink card.
- Adhere the 4 1/8” x 5 3/8” piece of Basic Black to the front of the Petal Pink card.
- Attach the embossed piece on to the black.
- Using Dimensionals and Mini Dimensionals, adhere to the group of three butterflies to the front of the card.
- Then, adhere the other two butterflies to the inside of the card with mini glue dots.
- Embellish the card front with Petal Pink sequins from the Basic Adhesive-Backed Sequins.
Feb 5, 2019 | occasions catalog, Shop, Spring, Stampin Up, Tutorial |
Today I would like to show you a Butterfly Gala Step Fold Card. It’s so beautiful and with the directions below, you can also create your own. Therefore, take a look below and see how you can create your own Step Fold Card. It will be so much fun that you will probably want to make two!
Front Side Back Side
All images © 1990-2018 Stampin’ Up!®
Create this card for any event or occasion in your life, or maybe as a favor to a friend. Change the sentiment or color to suit your need. Another idea is to just brighten someones day. After all, who doesn’t love butterflies and sweet wishes.
maybe, furthermore, in addition to, so consequently you probably have another and also
Supplies:
Stamps: Butterfly Gala (148580), Butterfly Gala Bundle (150599), Hello Cupcake (149714)
Stamp Pads: Tuxedo Black Memento (132708), Highland Heather (147103)
Paper: Whisper White (100730), Highland Heather (146986), Botanical Butterfly Designer Series Paper DSP (149622) Misc.: Triple Banner Punch (138292), Butterfly Duet Punch (1148523), Balmy Blue Light Stampin’ Blends (148540), Whisper White Flax Ribbon (1148764), Gingham Gala Adhesive-Backed Sequins (148561), SNAIL Adhesive (104332), Mini Glue Dot (103683), Tear & Tape Adhesive (138995)
Measurements:
• Highland Heather: 4 ¼” x 8 ½” score at ½”, 1 ½”, 3”, and 4”. 2 ½” x 4 ¼” score at ½” and 1 ½”.
• Whisper White: 4” x 4 ¼”, 1” x 3”, scrap for butterflies
• DSP: 2 7/8” x 4”, 2 ¼” x 2 ½”, ¾” x 4”
• Ribbon: 4”
Instructions:

1. First of all, fold on all score lines and place a piece of tear & tape on the ½” section on each piece of Highland Heather.
2. Adhere DSP to both of the Highland Heather pieces and fold the card base flat, remove the backing from the tape, fold the tab down and adhere.
3. Line up the bottom edge of the “step” with the bottom edge and the left edge of the card. Also, remove the tape backing, and adhere the tab. The lower portion of the step will still be loose, so adhere it just at the very bottom with SNAIL adhesive.
4. Next, stamp the outline of the butterflies in Tuxedo Black ink and stamp the inside of the wings in Highland Heather ink.
5. Use the Balmy Blue Light Stampin’ Blend to add some blue details to the wings.
6. Punch out the butterflies with the Butterfly Duet punch.
7. AFTER punching out the butterflies, stamp the center body portion of both butterflies in Tuxedo Black ink.
8. Punch 1” x 3” with the banner punch. Stamp “Sweet Wishes” on banner in Tuxedo Black.
9. Stamp “Celebrate Your Day” in Tuxedo Black on the 4” x 4 ¼” white piece. Adhere the ¾” x 4” strip of DSP at the top. Adhere this to the back of the step card. This is the “inside” of the card.

10. Adhere the banner to the front of the card and embellish with Gingham Gala Sequins.
11. Tie a knot in the Flax Ribbon, adhere to the card with 3 mini glue dots (one in the center and on each ribbon tail).
12. Finally, fold the butterflies in half so the “fly”, adhere to the card with mini glue dots.
13. The card folds flat and fits in a standard envelope for mailing and then the recipient can stand it up to display.
Here it is folded flat

Lastly, also, furthermore you have another and probably another, but on the other hand, to clarify. Because for example, it’s also
Here it is from the side view
