Flowery Get Well Greeting

I always love making get well cards to bring a smile to the face of anyone who is not feeling well.  Send a flowery get well greeting with the Daisy Lane stamp set.  This is fast becoming a favorite of mine because you can do so much with it.  The Mosaic Mood Specialty Designer Series Paper adds a special touch to the card.  You can use that paper for so many occasions.


All images © 1990-2019 Stampin’ Up!®

Supplies:
Stamp SetsDaisy Lane (149325), Healing Hugs (148223)
Card Stock – Terracotta Tile (150884), Very Vanilla (101650), Mosaic Mood Specialty Designer Series Paper [DSP] (149478)
Stamp Pads –Terracotta Tile (150086),
Misc. – Daisy Punch (143713), Stampin’ Dimensionals (104430), Perennial Essence Floral Centers (149442), SNAIL Adhesive (104332), Scalloped Tag Topper Punch (133324)

Measurements:
· Terracotta Tile: 5 ½” x 8 ½” scored at 4 ¼”, 1 7/8” x 3 1/4”
· Very Vanilla: 1 7/8” x 3 1/4”; 3 1/4” x 5 1/2” ; two pieces: 2 3/4” square
· DSP: 3” x 5 1/2”; 1/4” x 3 1/4”

Instructions:

1. Using SNAIL, adhere DSP to Very Vanilla layer, then to Terracotta Tile card base.
2. Punch one end of both Very Vanilla and Terracotta Tile cardstock using Scalloped Tag Topper Punch.
3. Ink phrase using Terracotta Tile ink and stamp in middle of Very Vanilla Tag. Adhere Mosaic Mood to bottom of tag.
4. Ink Daisy stamp using Terracotta Tile and stamp onto two Very Vanilla squares. Punch using Daisy Punch. Adhere two daisies together using SNAIL. Add Perennial Essence Floral Center.
5. Adhere two tags together using SNAIL; ensure Terracotta tag is slightly offset.
6. Lastly, adhere tags to card front using SNAIL. Attach Daisy to front of card using Stampin’ Dimensionals and you have your flowery get well greeting.

Musical Moments

Take advantage of the musical moments and a special card.  Also, when words are too much to say, let the Lasting Lily say them for you.  As a result, the card speaks to you because the Sheet Music background stamp set compliments the card so well.  So it helps bring it to life and make an impact. Another way to make it pop is to use the right color for the lily.  


All images © 1990-2019 Stampin’ Up!®
Probably, maybe and as well as also put another

Supplies:
Stamp Sets – Lasting Lily- SAB 2019 (149717), Sheet Music (143970)
Card Stock – Whisper White (100730); Berry Burst (144243); Mossy Meadow (133676)
Stamp Pads – Smoky Slate (147113); Berry Burst (147143); Basic Gray (149165); Mossy Meadow (147111)
Misc. – Berry Burst Metallic Edge Ribbon (145489)

Measurements:
● Mossy Meadow: 8 ½” x 5 ½ ”
● Berry Burst : 5 ⅛” x 3 ⅞”
● Whisper White: 4 ⅞” x 3 ⅝” (plus 4” x 5 ¼” for inside card)
● Berry Burst Ribbon: 17”

Instructions: to also add another probably therefore

1. Lay Sheet Music stamp face up on flat surface. Add Smoky Slate ink to stamp and lay smaller piece of white card stock on top. Cover with scratch paper and rub ink all over card stock. Remove card stock from the stamp. (TIP: Stamp a line or two of music from the TOP of the stamp onto the BOTTOM of the larger piece of white card stock for the inside card layer)
2. On right side of the stamped paper stamp flowers in Berry Burst and add stems and leaves in Mossy Meadow ink. (TIP: Using a Stamparatus for the flowers will enable you to get them in the same place every time!)
3. The sentiment is stamped on the left side using Going Gray ink. and another maybe as well as first of all
4. Adhere stamped layer onto Berry Burst card stock and tie the ribbon in a bow on front.
5. Lastly, attach the front of the card to the card base and layer to the inside of the card. and also another

Inspirational Words

Share these inspirational words with the special people in your life using the Painted Seasons stamp set.  This is also a different take on the stamp set.  Just another sample of how versatile this stamp set it and a good example to show you all you can do with it.  In addition, you can combine the Designer Series Paper for more color. 


All images © 1990-2019 Stampin’ Up!®

Supplies:

Stamp sets: Painted Seasons (bundled with Painted Seasons Designer Series Paper and available free with a $100 order by March 31 – 150349), Part of My Story (available free with a $50 order by March 31 – 149719), Crackle Paint (148752)
Cardstock & Paper: Early Espresso (119686), Crumb Cake (120953), Shimmery White (101910), Painted Seasons Designer Series Paper (see above – available free in a bundle)
Ink: Classic Stampin’ Pad Early Espresso (147114) and Crumb Cake (147116)
Miscellaneous: Big Shot Die-Cutting Machine (143263), Four Seasons Framelits Dies (available March 2019 only – 150074), Pretty Label Punch (143715), 3/8” Classic Weave Ribbon Crumb Cake (144162), Share What You Love Artisan Pearls (146927), Mini Glue Dots (103683), Stampin’ Dimensionals (104430), SNAIL Adhesive (104332), Paper Snips (103579)

Measurements:

• Crumb Cake card base: 4-1/4” x 11”, scored at 5-1/2” then folded in half; 2” x 3”
• Early Espresso: 3-3/4” x 5”, 2” x 3”
• Designer Series Paper: 3-1/2” x 4-3/4”
• Shimmery White: three scraps each 1-1/2” x 2”
• Ribbon: 7” and 2-1/2”  Finally, also, another, First of all

Instructions:

1. Stamp Crackle Paint on the card base with Crumb Cake ink.
2. Adhere Designer Series Paper to Early Espresso layer with SNAIL Adhesive.
3. Using SNAIL horizontally across Designer Series Paper piece about 1-1/2” from the bottom then press ribbon into it and wrap around back and affix ends with SNAIL.
4. Then, stamp one pinecone in Crumb Cake and two in Early Espresso on Shimmery White card stock then die cut with pinecone die using Big Shot.
5. Stamp sentiment from Part of My Story in Early Espresso onto Crumb Cake card stock. Punch out. Punch again from smaller Early Espresso. Cut the Early Espresso in half width-wise using Paper Snips and adhere to back of sentiment with SNAIL Adhesive so it creates a layer. Two Early Espresso halves will not meet in the back.
6. Create a spray of three pinecones by adhering them at their bottom with Mini Glue Dots. If you have a household stapler, stapling once at the bottom so all three pinecones are captured will keep it very secure when handling. Also, and in addition
7. Fold over the shorter ribbon piece in half. Trim ends. Spread them apart and adhere at the joint with one Mini Glue Dot. Using another Mini Glue Dot, attach to spray of pinecones.
8. Using Mini Glue Dots again, adhere sentiment piece to the bottom of pinecones so they display to the left of sentiment.
9. With Stampin’ Dimensionals, adhere Designer Series Paper piece to card base then sentiment to DSP piece.
10. Finally, add two Share What You Love Artisan Pearls to sides of sentiment.

Finally, in addition, Also, because and 

Lovely Lily Card

Create this lovely Lily card for that special person who needs your thoughtful words and let them know they can count on you.  It’s also the perfect card to send some long distance hugs to.  First of all, the colors are so bold but so soothing.  

All images © 1990-2018 Stampin’ Up!®

Supplies:
Stamp Sets – Lasting Lily (149717)
Card Stock – Whisper White (100730), Poppy Parade (119793)
Stamp Pads – Poppy Parade (147050), Old Olive (147090), Basic Gray (149165)
Misc. – Big Shot (143263), Lakeside Framelits (146351), Detailed Trio Punch (146320), Poppy Parade ¼” Striped Ribbon (146938), Stampin’ Dimensionals (104430)

Measurements:
• Whisper White (base): 4 ¼” x 11”, score at 5 ½” and Whisper White (layer): 3 ½” x 4 ¾”
• Smaller Whisper White” scrap
• Poppy Parade: 3 5/8” x 4 7/8”
• Ribbon: 20”

Instructions:

1. Stamp the single stem using Old Olive ink on the Whisper White cardstock layer then stamp the twist, large leaf image using Old Olive ink, along the stem.
2. Next, stamp the stem/leaf image using Old Olive ink next to the previous stem.
3. Now, stamp the full lily image using Poppy Parade ink on each of the stems.
4. Adhere to the Whisper White layer to the Poppy Parade layer.
5. Add the greeting using Basic Gray ink and stamp on Whisper White scrap cardstock. Die cut the greeting using the label from the Lakeside Framelits.
6. Using the Detailed Trio Punch, punch a small hole on each side of the die cut label. Thread the ribbon through the holes, wrapping it around the cardstock layers. Finish by tying a bow on the left-hand side a shown.
7. Finally, adhere the cardstock layer to the card base using Dimensionals.

Free Lasting Lily

If you enjoy Sale-a-Bration as much as I do, you are going to love this card.  One of the products you can earn during Sale-a-Bration is the free Lasting Lily stamp set.  It has coordinating products as well.  I love the stamp set because as you can see from the card below, you can really use it for any occasion by simply changing the sentiment.  The one below is a thoughtful thinking of you card. 

All images © 1990-2018 Stampin’ Up!®

 

Supplies
Stamp Sets – Lasting Lily (149717)
Card Stock – Whisper White (100730), Poppy Parade (119793)
Stamp Pads – Poppy Parade (147050), Old Olive (147090), Basic Gray (149165)
Misc. – Big Shot (143263), Lakeside Framelits (146351), Detailed Trio Punch (146320), Poppy Parade ¼” Striped Ribbon (146938), Stampin’ Dimensionals (104430)

Measurements:  

  • A Whisper White (base): 4 ¼” x 11”, score at 5 ½”
  • Whisper White (layer): 3 ½” x 4 ¾”
  • Another Whisper White piece from scrap
  • Poppy Parade: 3 5/8” x 4 7/8”
  • Ribbon: 20”

 

Instructions:
  1. First if all, you need to stamp the single stem image using Old Olive ink on the Whisper White cardstock layer. Stamp the twist, large leaf image using Old Olive ink, along with the stem.
  2. Then you stamp the stem/leaf image using Old Olive ink next to the previous stem.
  3. Stamp the full lily image using Poppy Parade ink on each of the stems.
  4. Adhere the Whisper White layer to the Poppy Parade layer.
  5. Stamp the greeting using Basic Gray ink on Whisper White scrap cardstock. Die cut the greeting using the label from the Lakeside Framelits.
  6. Using the Detailed Trio Punch, punch a small hole on each side of the die cut label. Thread the ribbon through the holes, wrapping it around the cardstock layers. Finish by tying a bow on the left-hand side a shown.
  7. Attach the cardstock layer to the card base using Dimensionals.