Feb 25, 2020 | Bundles, Card Tutorial, Friendship, Tutorial |
You can create this greatest by far card with the Clubhouse stamp set. It’s another card I’m showcasing using that stamp set. There always seems to be a shortage of male themed cards and I’m so happy that there are a few more options now. The colors alone are perfect for the men in your life.
All images © 1990-2020 Stampin’ Up!®
Supplies:
• Stamp Sets – Clubhouse (151583)
• Card Stock (CS) – Crushed Curry (131199); Garden Green (102584); Poppy Parade (119793); Whisper White Thick (140272); Whisper White (100730)
• Ink Pads – Garden Green (147089); Versamark (102283)
• Misc. – Golf Club Dies (151580); Absolutely Argyle 3d Embossing Folder (151590); Country Club Designer Series Paper (151314); Clear Stampin’ Emboss Powder (109130); Country Club Twine Combo Pack (151318); Whisper White Note Cards & Envelopes (131527)
Measurements:
• Garden Green CS: 3-1/4” x 4-3/4”; plus scraps for die cutting
• Crushed Curry CS: scrap for die cutting
• Poppy Parade CS: 3” x 4-1/2”
• Whisper White CS: 2-1/2” x 2-1/4”
• Whisper White Thick CS: scraps for die cutting
• DSP: 3-1/4” x 1-1/2”
Instructions:
1. Burnish the fold in the note base using a Bone Folder.
2. Emboss the Poppy Parade CS layer using the Absolutely Argyle 3D embossing folder.
3. Glue the Poppy Parade CS layer onto the Garden Green CS layer.
4. Glue the DSP layer onto the Poppy Parade CS layer.
5. Glue the Whisper White CS layer over the DSP layer.
6. Tie Garden Green twine around the layers and tie in a knot on the front.
7. Glue the Garden Green CS layer onto the front of the card base.
8. Stamp the sentiment twice in Garden Green ink onto a scrap of Whisper White Thick CS.
9. Die cut one sentiment using the crest shaped die.
10. Die cut the second sentiment using the banner shaped die.
11. Die cut a large golf ball from a scrap of Whisper White Thick CS.
12. Die cut a tee from a scrap of Crushed Curry CS.
13. Die cut 5 grass clumps from a scrap of Garden Green CS.
14. Cover the die cut golf ball with Versamark ink, then cover it with clear embossing powder, then heat emboss it.
15. Glue 2 Garden Green CS grass clumps onto the Whisper White CS layer.
16. Adhere the golf ball, tee, and remaining grass clumps onto the Whisper White CS layer using Stampin’ Dimensionals.
17. Glue the crest shaped sentiment onto the Poppy Parade CS layer.
18. Adhere the banner sentiment over the crest shaped sentiment using Stampin’ Dimensionals.
Feb 23, 2020 | Birthday, Card Tutorial, Tutorial |
A golf style birthday care is perfect for all the golfers in your life. They take the sport very seriously so when you acknowledge it, they will love you. This care was created with the Club House stamp set and has a bunch of adorable embellishments on it.
All images © 1990-2020 Stampin’ Up!®
Supplies:
• Stamp Sets: Club House (151583)
• Cardstock: Night Of Navy (100867), Garden Green (102584), Daffodil Delight (119683), Mint Macaron (138337)
• Ink: Night Of Navy (147110),
• Tools & Accessories: Golf Club Dies (151580), Country Club Elements (151315), Daffodil Delight ¼” Ruched Ribbon (151311), Stampin’ Dimensionals (104430), Multipurpose Glue (110755), Starburst Punch (14377)
• Designer Paper: Country Club (151314)
Measurements:
• Card Base: Night Of Navy Cardstock 8-1/2” x 5-1/2”. Score and fold at 4-1/4”.
• Cardstock #2: Daffodil Delight Cardstock 5-1/4” x 4”.
• Designer Paper #1: Country Club 5” x 3-3/4”
• Designer Paper #2: Country Club 5” x 1”
Instructions:
• Glue Daffodil Cardstock layer to Night Of Navy card base. Set aside.
• Glue 1” strip of designer paper to large piece of designer paper about 1” from the bottom.
• Cut a piece of ribbon longer than the designer paper and form a knot about 2” from one end. Glue to designer paper layer below the designer paper strip by wrapping the ribbon ends to the back and gluing them in place. Glue designer paper layer to card front.
• Cut a circle using the Starburst Punch and Garden Green Cardstock. Glue to card front using Stampin’ Dimensionals over the ribbon and designer paper strip and to the left.
• Using Daffodil Delight Cardstock, cut with the V-shaped branch die. Glue to starburst circle, at the bottom.
• Using Night Of Navy Cardstock, cut with the crest-shaped die. Glue to the starburst circle using Stampin’ Dimensionals, above the branch die-cut.
• Using Mint Macaron Cardstock, cut the small grass shape with the die. Glue to the right of the starburst using Stampin’ Dimensionals.
• Stamp the sentiment using Night Of Navy Ink on one of the wooden banner elements. Glue to the 1” designer paper layer with Multipurpose Glue.
• Add wooden elements onto the crest shape and the small circles in the background. Then let them enjoy their golf style birthday card.
Jan 12, 2020 | Card Tutorial, Spring, Stampin Up, Tutorial |
Get the country club tailored look with the Clubhouse stamp set. The wording and sentiment are on the inside of the card and it lets them know exactly how you feel. Having the golf balls on the front is my favorite part of this card.
Supplies:
• Stamp Sets – Clubhouse (151583)
• Card Stock (CS) – Whisper White (140272); Basic Black (121045); Basic Gray (121044); Smoky Slate (131202)
• Ink Pads – Tuxedo Black Memento Ink (132708)
• Misc. – Golf Club Dies (151580); Tailored Tag Punch (145667); Country Club Designer Series Paper (151314); Basic Black Stampin’ Write Marker (100082); Multipurpose Liquid Glue (110755); Paper Snips (103579); Bone Folder (102300)
Measurements:
• Basic Black CS: 4-1/4” x 11” scored in half at 5-1/2”; 3-1/2” x 4-3/4”; scrap for punching
• Basic Gray CS: 4” x 5-1/4”
• Smoky Slate CS: 3-3/4” x 5”
• Country Club DSP: argyle pattern 3” x 4-1/4”
• Whisper White CS: 4” x 5-1/4”; scrap for die cutting
Instructions:
1. Fold the card base along the scoreline and burnish with a Bone Folder.
2. Glue the Basic Gray, Smoky Slate and Basic Black CS layers onto the front of the card base.
3. Next, glue the DSP layer onto the Basic Black CS layer.
4. Punch a scrap of Basic Black CS using the Tailored Tag Punch.
5. Cut out the golf bag image from the DSP using Paper Snips.
6. You will then have to glue the golf bag image onto the punched tag.
7. The punched tag will now have to be glued onto the DSP layer.
8. Die cut the 3 golf balls from the DSP using a banner die the Gold Club Dies, and glue it onto the DSP layer.
Inside:
1. Draw shading onto the die that cuts 3 tiny golf balls using a Basic Black Stampin’ Write marker, and use it to die cut a scrap of Whisper White CS.
2. On the Whisper White CS layer, stamp the sentiment in black ink.
3. Add the 3 tiny golf balls beneath the sentiment (with glue).
4. Finally, glue the Whisper White CS layer onto the inside of the card base and you are done.
All images © 1990-2018 Stampin’ Up!®
