Mar 14, 2019 | Flowers, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
You can create some beautiful country butterflies for friends and family with the supplies listed below. The soft color and background embossed floral design go perfectly together. I also love the black outline of the butterflies because it makes them pop off the card. It’s created with the Beauty Abounds bundle.
All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamps: Beauty Abounds (148726), Beauty Abounds Bundle (150617)
Stamp Pads: Tuxedo Black Memento (132708)
Paper: Petal Pink (146985), Basic Black (121045), Sparkle Glimmer Paper (146957)
Misc.: Butterfly Beauty Thinlits Dies, Country Floral Dynamic Textured Impressions Embossing Folder (149698), Multipurpose Adhesive Sheets (144106), Big Shot Die-cutting Machine (143263), Basic Adhesive-Backed Sequins (146933), Dimensionals (104430), Mini Dimensionals (144108), SNAIL Adhesive (104332), Mini Glue Dots (103683), Big Shot Die Brush (144262), Paper-Piercing Tool (126189)
Measurements:
• Petal Pink: 5 ½” x 8 ½” score at 4 ¼” for card base
4” x 5 ¼”
• Basic Black: 4 ¼” x 5 ½”
4 1/8” x 5 3/8”
• Grapefruit Grove Foil: 4” x 5 ½”
• Multipurpose Adhesive Sheet: 4” x 5 ¼”
And here is the inside of the card:
Instructions:
- Peel the white backing off of the adhesive sheet and adhere it to the 4 ¼” x 5 ½” piece of Basic Black card stock (for more precise alignment try peeling off the upper half of the backing, placing the upper part of the adhesive sheet on the top of the black cardstock, then peeling off the rest of the backing once you know it is straight).
- Cut the large butterflies top layer die from the Basic Black card stock with the adhesive sheet on the back.
- Cut the underlayer die of the large butterflies from the Sparkle Glimmer Paper. Use the Die Brush and the Paper-Piercing Tool to remove all of the excess pieces from the die and the paper.
- Peel the backing off of the Basic Black Butterflies – remove any little pieces that did not come off when you removed the backing.
- Adhere to the Basic Black Butterflies layer on to the Sparkle Glimmer Butterflies layer.
- Insert the 4” x 5 ¼” piece of Petal Pink into the Country Flowers Embossing Folder and send it through the Big Shot with one cutting pad.
- Carefully cut off two of the butterflies to put on the inside of the card.
- Stamp “For You” in Tuxedo Black inside the Petal Pink card.
- Adhere the 4 1/8” x 5 3/8” piece of Basic Black to the front of the Petal Pink card.
- Attach the embossed piece on to the black.
- Using Dimensionals and Mini Dimensionals, adhere to the group of three butterflies to the front of the card.
- Then, adhere the other two butterflies to the inside of the card with mini glue dots.
- Embellish the card front with Petal Pink sequins from the Basic Adhesive-Backed Sequins.
Mar 13, 2019 | Birthday, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
You may find yourself looking at some “hoppy frogs” when you put this card together. The So Hoppy For You stamp set is another stamp set you can earn for free during Sale-a-Bration. Also, be sure to take advantage of it before the end of March.
All images © 1990-2018 Stampin’ Up!®
First of all, another
Supplies:
Stamp Sets – So Hoppy Together (149725 cling)
Card Stock & Paper – Tropical Escape DSP (146916); Soft Sea Foam (146988); Granny Apple Green (146990); Shaded Spruce (146981); Whisper White (100730)
Stamp Pads – Memento Tuxedo Black (132708)
Misc. – Granny Apple Green Stampin’ Blends Combo (147274); Petal Pink Light Stampin’ Blends (146866); Flirty Flamingo Light Stampin’ Blends (147031); Wink of Stella Glitter Brush (141897); Basic Adhesive Backed Sequins (146933); Dot To Dot Impressions Folder (148533); Stitched Shapes Framelits Dies (145372); Big Shot (143263); Tear & Tape Adhesive (138995); SNAIL Adhesive (104332); Stampin’ Dimensionals (104430); Also, Optional: Hop Around Framelits (150073, available in March 2019 only while supplies last)
Measurements:
• Soft Sea Foam: 5 ½” x 8 ½”, scored at 4 ¼” card base; 5 ¼” x 4”
• Granny Apple Green: 4 ¼” x 2”
• Tropical Escape DSP: 1” x 5”
• Shaded Spruce: 2 ¾” x 2 ¾”
• Whisper White: 3” x 3” scrap
Instructions:
1. Emboss Granny Apple Green cardstock with Dot To Dot Embossing Folder and adhere to Soft Sea Foam card base with Tear & Tape Adhesive.
2. Next, adhere Tropical Escape DSP to the card front.
3. Die-cut Whisper White cardstock with 2 5/8” square from Stitched Shapes Framelits.
4. Stamp the frog, butterfly and sentiment from So Hoppy Together onto white piece using Memento Tuxedo Black ink.
5. Color the frog and butterfly with Stampin’ Blends Markers, the brush on Wink of Stella on the frog’s spots and butterfly wings.
6. Attach the white square to the Shaded Spruce square with SNAIL adhesive, then pop up with Dimensionals onto the card front.
7. Add a single Basic Adhesive Backed Sequin in Petal Pink.
8. Lastly, as an optional alternative: Stamp frog & butterfly on scrap Whisper White, die-cut with Hop Around Framelits, color and pop up with Dimensionals onto square.
Mar 11, 2019 | Birthday, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
Share these inspirational words with the special people in your life using the Painted Seasons stamp set. This is also a different take on the stamp set. Just another sample of how versatile this stamp set it and a good example to show you all you can do with it. In addition, you can combine the Designer Series Paper for more color.
All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamp sets: Painted Seasons (bundled with Painted Seasons Designer Series Paper and available free with a $100 order by March 31 – 150349), Part of My Story (available free with a $50 order by March 31 – 149719), Crackle Paint (148752)
Cardstock & Paper: Early Espresso (119686), Crumb Cake (120953), Shimmery White (101910), Painted Seasons Designer Series Paper (see above – available free in a bundle)
Ink: Classic Stampin’ Pad Early Espresso (147114) and Crumb Cake (147116)
Miscellaneous: Big Shot Die-Cutting Machine (143263), Four Seasons Framelits Dies (available March 2019 only – 150074), Pretty Label Punch (143715), 3/8” Classic Weave Ribbon Crumb Cake (144162), Share What You Love Artisan Pearls (146927), Mini Glue Dots (103683), Stampin’ Dimensionals (104430), SNAIL Adhesive (104332), Paper Snips (103579)
Measurements:
• Crumb Cake card base: 4-1/4” x 11”, scored at 5-1/2” then folded in half; 2” x 3”
• Early Espresso: 3-3/4” x 5”, 2” x 3”
• Designer Series Paper: 3-1/2” x 4-3/4”
• Shimmery White: three scraps each 1-1/2” x 2”
• Ribbon: 7” and 2-1/2” Finally, also, another, First of all
Instructions:
1. Stamp Crackle Paint on the card base with Crumb Cake ink.
2. Adhere Designer Series Paper to Early Espresso layer with SNAIL Adhesive.
3. Using SNAIL horizontally across Designer Series Paper piece about 1-1/2” from the bottom then press ribbon into it and wrap around back and affix ends with SNAIL.
4. Then, stamp one pinecone in Crumb Cake and two in Early Espresso on Shimmery White card stock then die cut with pinecone die using Big Shot.
5. Stamp sentiment from Part of My Story in Early Espresso onto Crumb Cake card stock. Punch out. Punch again from smaller Early Espresso. Cut the Early Espresso in half width-wise using Paper Snips and adhere to back of sentiment with SNAIL Adhesive so it creates a layer. Two Early Espresso halves will not meet in the back.
6. Create a spray of three pinecones by adhering them at their bottom with Mini Glue Dots. If you have a household stapler, stapling once at the bottom so all three pinecones are captured will keep it very secure when handling. Also, and in addition
7. Fold over the shorter ribbon piece in half. Trim ends. Spread them apart and adhere at the joint with one Mini Glue Dot. Using another Mini Glue Dot, attach to spray of pinecones.
8. Using Mini Glue Dots again, adhere sentiment piece to the bottom of pinecones so they display to the left of sentiment.
9. With Stampin’ Dimensionals, adhere Designer Series Paper piece to card base then sentiment to DSP piece.
10. Finally, add two Share What You Love Artisan Pearls to sides of sentiment.
Finally, in addition, Also, because and
Mar 1, 2019 | occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
Take time to appreciate mom this year. This card was created using the Well Said bundle from the Occasions Catalog. The embellishments that are added give the card character and that little something extra. The Petal Pink base and Mossy Meadow leaves compliment each other so well and the sequins are my favorite addition. We should always go all out to appreciate mom.
All images © 1990-2018 Stampin’ Up!®
Supplies:
Stamp Sets – Well Said Bundle (150609 cling stamp) OR Well Said stamps (148796 cling stamp)
Card Stock & Paper – Floral Romance DSP (148586); Petal Pink (146985); Mossy Meadow (133676); Fresh Fig (144242); Whisper White (100730)
Stamp Pads – Fresh Fig (147144)
Misc. – Basic Adhesive Backed Sequins (146933); Tufted Texture Impressions Folder (146335); Wonderful Floral Framelits Dies (148529); Well Written Framelits (148534); Big Shot (143263); Multipurpose Liquid Glue (138309); Tear & Tape Adhesive (138995); SNAIL Adhesive (104332); Stampin’ Dimensionals (104430)
Measurements:
• Petal Pink: 5 ½” x 8 ½”, scored at 4 ¼”; 5 ¼” x 4”
• Whisper White: 3 ¾“ x 1”
• Floral Romance DSP: 4 ½” x 1 ½“; 5” x ¾”
• Mossy Meadow: scrap for leaves die-cuts
• Fresh Fig: scrap for word die-cuts
Instructions:
1. Embossed Petal Pink cardstock with Tufted Embossing Folder and adhere to Petal Pink card base with Tear & Tape Adhesive.
2. Fishtail cut the ends of the two DSP pieces. Adhere to the background.
3. Again, fishtail cut the White piece. Stamp Well Said phrase in Fresh Fig ink onto the right side.
4. Die-cut Fresh Fig “happy” with the Well Written Framelits. Adhere with Liquid Glue.
5. Next, die-cut two Mossy Meadow leaves with Wonderful Floral Framelits. Adhere to back of sentiment layer. Pop up with Dimensionals.
6. Finally,add a few Mint Macaron Basic Adhesive Backed Sequins around the focal point.
Feb 22, 2019 | Birthday, occasions catalog, Sale-A-Bration, Shop, Spring, Stampin Up |
Send someone a birthday surprise with this lovely card created with the Birthday Cheer stamp set. Also, because it’s a birthday set, you can create dozens of them and probably use them all year long. In addition, the layers of cupcakes will put a smile on everyone’s face and therefore make you smile as well. It’s easy to put together and so much fun to make. Everyone has a birthday, so you can certainly get use out of it while you have fun.
All images © 1990-2019 Stampin’ Up!®
probably maybe, while almost and finally
Supplies:
Stamp Sets – Birthday Cheer* (148604c) and
Card Stock –Thick Whisper White (140272); Highland Heather (146986); Whisper White (100730); Lovely Lipstick (146970); Call Me Clover (146969)
Stamp Pads – Highland Heather (147103); Lovely Lipstick (147140)
Misc – Big Shot Die-Cutting Machine (143263); Detailed Birthday Edgelits Dies* (148548); Stitched Shaped Framelits (145372); Basket Weave TIEF (146841); Gingham Gala 6” x 8” Designer Series Paper (148554); Gingham Gala Adhesive-Backed Sequins (148561); Wink of Stella (141897); Call Me Clover Light Blends (147023); Pineapple Punch Dark Blends(147030); Lovely Lipstick Light Blends(147026); Highland Heather Combo Blends (147276); Mini Glue Dots (103683); Stampin’ Dimensionals (104430)
*Birthday Cheer Bundle (150576) probably another and while in addition to it’s even more
Measurements:
• Thick Whisper White CS: 4-1/4” x 11″, scored at 5-1/2” and
• Highland Heather CS: 5-1/4” x 4″ and
• Whisper White CS: 3” x 3”; 2-1/2” x 4”; 2” x 2” also
• Gingham Gala DSP: 3” x 3” also
• Scraps: Lovely Lipstick CS and Call Me Clover CS also while you can so almost probably even more finally, therefore
Instructions: You probably also need to firstly and foremost add another maybe
1. First of all, fold Thick Whisper White cardstock on score line and create card base.
2. Run Highland Heather CS through Big Shot using Basket Weave TIEF and add to card front.
3. Attach Gingham DSP to card front with adhesive.
4. Die cut square layer from Whisper White CS using square framelit from Stitched Shapes Framelits and Big Shot. Then, adhere to card front centering over Gingham Gala DSP.
5. Stamp single cupcake image using Highland Heather ink onto Whisper White CS and color with Highland Heather Blends Combo. Also, color sprinkles with Lovely Lipstick, Pineapple Punch and Call Me Clover Blends. The ‘icing’ should be colored with Wink of Stella ink and added to stitched square layer using Stampin’ Dimensionals.
6. Next, die cut ‘3 cupcakes’ from Whisper White CS using Detailed Birthday Edgelit dies and Big Shot. Then, die cut ‘cherry’ from Lovely Lipstick CS and ‘cherry stem from Call Me Clover CS. The ‘icing’, ‘cherry’, and ‘heart’ of die cuts should be colored using Wink of Stella ink
7. Put the ‘3 cupcakes’ die cuts to the bottom of card front with your adhesive. Add Lovely Lipstick ‘cherry’ and Call Me Clover ‘stem’ to fill in die cut with Mini Glue Dots; then add Lovely Lipstick ‘heart’ to the third cupcake as well using Mini Glue Dots.
8. Stamp ‘sentiment’ using Lovely Lipstick ink pad to the bottom of die cut square.
9. Lastly, finish by adding Gingham Gala Adhesive-Backed Sequins to card front randomly.
lastly as well as another and you probably
