This card is perfect for a cold winter night in December. Usually, it means the holidays are approaching. This is a perfect card to bring a snowy night to life. I love the colors that represent the cold and the Winter. You can add some glitter for a more dominant effect.
Supplies: Stamp Sets: Peaceful Boughs (150541) Cardstock and paper: Night of Navy (100867), Whisper White (100730), Feels Like Frost Designer Series Paper (150444) Ink: Night of Navy (147110), Seaside Spray (150085), Versamark (102283) Tools & Accessories: 1 ½” Circle Punch (138299), Embossing Buddy (103083), SNAIL Adhesive (104332), Stampin Dimensionals (104430), Shimmer White Embossing Powder (149511) 5/8″ Whisper White Flax Ribbon (148764), Rhinestone Basic Jewels (144220) Multipurpose Liquid Glue (110755), Heat Tool (129053), Snowfall Accents Puff Paint (150691), Shimmer Paint Champagne Mist (147044) mixed in spray bottle with Isopropyl Alcohol, Die Cutting Machine
Measurements: Card base: Night of Navy 8 ½” X 5 ½” then score at 4 ¼”. Plus scrap for branch and sentiment tag Whisper White: two pieces 4 ¾” X 3 ½” plus scrap at least 2″ x 2″ Designer Series Paper: Feels like Frost 5 ¼” X 4”
Instructions: Using 1 ½” Circle Punch, cut circle from Whisper White Hold circle onto Whisper White cardstock where you want your moon and lightly sponge around outside of circle getting gradually getting darker as you move out away from circle. You may hold circle in place by hand or by using Washi Tape. Other tape may cause it to tear when removed. After outline of moon with light ink is completed, start sponging with Night of Navy ink, working out to all the edges, blending as best as you can. You may need to “sponge off” some to prevent sky getting too dark. When complete, you can remove the circle. Use stamp with dots and with Versamark ink, stamp randomly on the card to make it look like snow. Cover the dots using the Shimmer White Embossing Powder. With Heat Tool, emboss the snowflakes taking care to not burn your paper. Cut out the tag and branch using the dies from Beautiful Boughs. Use the Snowfall Puff Paint to randomly place on branches then heat emboss. Stamp the sentiment onto the tag using Versamark and White Embossing Powder (words are more clear and crisp with plain white vs shimmery white embossing powder). Heat to emboss the words. Adhere Designer Series Paper to card base. Adhere branch to sponged Whisper White card front then wrap ribbon around it at the bottom, tie it, then add sentiment piece on top of it. Adhere branch/moon piece to Designer Series Paper. Lightly spritz Champagne Glimmer Paint mixture over front of card (optional but very pretty) Add Whisper White on inside of card so it can be written onto. Place a rhinestone on each side of the tag sentiment where the holes are. Remember, you do not have to invent the wheel to be creative, just copy this project! Did you make it with your own hands? Then you have created!
I have another Snowman card to share. The bright colors always make me smile. This is an alternative project idea to the snowman card previously shared with the same stamp set.
Supplies: Stamp Set – Snowman Season (150458); Bundle with Snowman Punch (152337) Card Stock – Thick Whisper White (140272); Whisper White (100730); Cherry Cobbler (119685) Stamp Pads – Memento Tuxedo Black (132708) Misc. – Stampin’ Blends Pool Party Combo (144605); Stampin’ Blends Light Smoky Slate (145054); Stampin’ Blends Light Pumpkin Pie (144578); Let It Snow Specialty Designer Series Paper (150393); Diagonal Stripe Ribbon in Cherry Cobbler (150439); Winter Knit 3D Embossing Folder (150645); Starburst Punch (143717); 2” Circle Punch (133782); Stampin’ Dimensionals (104430); Mini Stampin’ Dimensionals (144108); Snail Adhesive (104332); Mini Glue Dots (103683); Paper Snips (103579); Embossing/Die Cutting Machine
Thick Whisper White Cardstock: 5 ½” x 8 ½” scored at 4 ¼” Whisper White Cardstock: 4” x 2 ½” for sentiment and 2” circle punch Cherry Cobbler Cardstock: 5 ¼” x 4” Let It Snow Specialty Designer Series Paper: 2” x 4” for banner and a scrap piece approx. 2 ½” for starburst punch
Emboss the Cherry Cobbler layer with the Winter Knit embossing folder and add it to the front of the thick Whisper White Card with snail adhesive.
Cut a flag banner at the bottom of the 2” x 4” piece of Designer Paper with your paper snips and add it to the front of your card with snail adhesive.
Stamp the sentiment and snowman image on Whisper White cardstock using Memento Black Ink. Punch the snowman out with the 2” circle punch and cut the sentiment out with your paper snips. Color the snowman with Stampin’ Blends. I used the light Pumpkin Pie for his nose, light Pool Party for the snowman, and Smoky Slate for the snow and outline of the snowman. Then I used the light Pool Party to make dots of snow on the sentiment.
Punch some Designer Paper using the Starburst Punch. The print I used is the backside of the snowman one shown on the banner.
Make a faux bow with the Cherry Cobbler Ribbon and tack it down on the card front with Mini Glue Dots. (I don’t really tie a bow so that it’s not bulky) Attach the snowman image to your Starburst Punched shape with snail and pop it up over the ribbon with Stampin’ Dimensionals.
Add the cut sentiment pieces with Mini Stampin’ Dimensionals to the front of the card.
Designer Paper: Come Sail Away 3 5/8 x 4 7/8 Balmy Blue Stripe, 2 ½ x 3 ¼ Night of Navy Stripe
Stamp the snowflakes from Snowman Season over the Come Sail Away Balmy Blue stripe in stamped off Night of Navy and stamped off Balmy Blue.
Adhere the designer paper to the Flirty Flamingo layer.
Tie about 8 inches of the Polka Dot Tulle Ribbon around these layers and tie in a knot a little below the halfway mark from top to bottom and to the left of the card front.
Adhere these layers to the card front.
Cut the navy stripe paper with the Layering Ovals dies. Add this paper to the card front with Stampin’ Dimensionals.
Punch the snowman using the Snowman Builder Punch from Whisper White. Add features using the Let It Snow Embellishments Kit. For the face, start with the carrot nose and then add the eyes and mouth. Add the buttons down the front. Use the Snowfall Accents Puff Paint to fill in around the features and cover most of the snowman. Heat with the Heat Tool to make the paint puff. Add the snowman to the navy stripe with Stampin’ Dimensionals. Complete with the arms from the kit. Add the hat and scarf in Flirty Flamingo using a little glue and Stampin’ Dimensionals.
The sentiment is stamped on a piece of Whisper White measuring 5/8 x 3 ½. Stamp in Flirty Flamingo ink. Notch the ends using the Triple Banner Punch. Add using Stampin’ Dimensionals and place this just under the snowman so he has a little snow under him. We don’t want him just floating!
Add the mittens with a dot of glue and Stampin’ Dimensionals.
Remember, you do not have to invent the wheel to be creative, just copy this project! Did you make it with your own hands? Then you have created! Click here for any supplies you need.
Create a winter holiday scene with the Still Scenes Bundle from the Holiday Catalog. It will give you a chance to bring a special scene to life this winter. I love collecting snow globes and this Bundle allows me to have a little more fun with it. You can also purchase the Snow Globe Shaker Domes and take it up a notch. Add confetti, fake snow, glitter or anything you can think of to enhance your card.
This bundle can also be used at other times of the year. Just choose your image for your scene and you have your inspiration.
You can purchase this bundle from my online store here. You can also visit the Holiday catalog section of my store here to browse the Holiday Catalog online. Don’t forget that all our bundles save you an additional10%. There is still time to plan your holiday projects.
You can create your Fall giving thanks card with the Harvest Hello Bundle from the Holiday Catalog. There is so much you can do with this stamp set. I love the background on this card which was created using the Hammered Metal Embossing Folder. It gives the card such character.
· Soft Suede: 5 ½” x 8 ½” scored at 4 ¼” , 4” x 5 ¼” , starburst shape and scrap · Very Vanilla: 4” x 5 ¼” (for inside), 2 ¾” x 4 ¼” and scrap for pumpkin · Soft Seafoam: 2 ¼” x 4” · Vellum: 2” circle · Linen Thread: 8”
Instructions: 1. Emboss the 4” x 5 ¼” piece of soft suede cardstock using the hammered metal embossing folder. Add to the card front. 2. Using the two pumpkin images from the Gather Together stamp set and soft seafoam ink, stamp repeatedly onto the soft seafoam cardstock. 3. Stamp greeting using soft suede ink onto the lower right corner. Add that to the center of the smaller vanilla cardstock. And that to the card front. 4. Layer the vellum circle onto the starburst and add that to the card front. 5. Stamp pumpkin image from harvest hellos using soft seafoam ink onto a scrap of vanilla cardstock and punch it out using the coordinating punch. 6. Punch out the pumpkin stem from a scrap of soft suede. Add it to the back of the pumpkin. 7. Add the pumpkin to the card front using dimensionals. 8. Tie a bow from linen thread and add it to the pumpkin.
Independent Demonstrator for Stampin' Up! since 2002.
The content in this blog is the sole responsibility of Stella MacKay as an Independent Stampin’ Up! Demonstrator. The use of and content of classes, services or products offered is not endorsed by Stampin’ Up!