Nov 6, 2018 | 12 Weeks of Christmas, Christmas, Holiday Catalog |
Bring on the Presents 3D Gift Bag
All images © 1990-2018 Stampin’ Up!®
This is a great 3D Gift Bag to use for anyone on your holiday gift list. The 3D bow adds dimension to the project and gives you the wow factor for your family and friends. You can create a bunch of them and keep them on hand all season long. Take a look at the bow up close and see how beautiful it is. You can get the stamp set and All The Presents Thinlits in a bundle and save 10%.
Here are the ingredients for the 3D Gift Bag
Supplies:
Stamp Sets – Bring on the Presents (147767, or bundle with All the Presents Thinlits Dies- 149926)
Card Stock – Whisper White (100730)
Stamp Pads – Staz-On Black (101406); Real Red (147084)
Misc. – Striped Treat Bags (144255); Gold Foil Paper (132622); Gold Glimmer Paper (146958); Window Sheets (142314); Cherry Cobbler Stampin’ Blends- Dark (144575); All the Presents Thinlits Dies (147917); Suite Season Specialty Washi Tape (148079); Stampin’ Dimensionals (104430); Liquid Glue (110755); Mini Glue Dots (103683); Paper Snips (103579)
Measurements:
Whisper White Cardstock- 3” x 2”
Gold Foil Paper- Scrap piece approx. ½” x 2 ½”
Gold Glimmer Paper- approx. 4” x 2 ½”
Window Sheet- approx. 4” x 2 ½”
Instructions:
- Stamp your two bow pieces on the window sheet using Staz-On black ink. Keep your hand steady because it’s slippery- or use your Stamparatus to get a good stamped image.
- Flip them over and color with your Cherry Cobbler Stampin’ Blend and set aside to let it dry. The coloring will look streaky but once you add the glimmer paper under it, it won’t show.
- Use the Suite Season Specialty Washi Tape in the polka dot print over each of the gold stripes on your bag. Just cut the ends with your paper snips and rub your finger over the tape to the ends of the bag to make sure it sticks well.
- Stamp your To: From: sentiment in the middle of your Whisper White tag.
- Die cut the border using the die from All the Presents die set in Gold Foil Paper. Adhere that border to the bottom of the tag using liquid glue. Snip ends with paper snips to be even with the tag.
- Die cut both bows on the window sheet and one of each of the bows from the Gold Glimmer Paper. Then, attach the small window sheet bow (stamped side up) to the small glimmer paper blow using glue dots. The glue dots will be invisible. Do the same for the bigger bow. Attach the small bow to the bigger bow with a Stampin’ Dimensional.
- Attach the bow combo to the top of the tag with Stampin’ Dimensionals and attach the tag to your 3D Gift Bag.
Remember, you do not have to invent the wheel to be creative, just copy this project! Did you make it with your own hands? Then you have created! Order any of these supplies by clicking on any image in this email or by linking to my ONLINE STORE.
Oct 16, 2018 | 12 Weeks of Christmas, Christmas, Holiday Catalog |
We have another great project for week 3 of our 12 Weeks of Christmas projects. This is an traditional colored gift bag decorated with adorable penguins and snowflakes. Add a gift to place inside and you have the perfect holiday surprise for that special someone. I hope you have been enjoying the creative inspiration these last three weeks. You still have 9 weeks left…. Sit back and enjoy the ride!
Let It Snow Gift Bag
All images © 1990-2018 Stampin’ Up!®
Supplies:
- Stamp Sets – Making Every Day Bright (148813); Alpine Adventure (147741)
- Cardstock – Call Me Clover (146969); Pool Party (122924); Poppy Parade (119793); Whisper White (100730)
- Stamp Pads – Memento Tuxedo Black (132708); Poppy Parade (147050)
- Misc. – Granny Apple Green Dark Stampin’ Blends Marker (146877); Mango Melody Dark Stampin’ Blends Marker (147944); Poppy Parade Dark Stampin’ Blends Marker (146879); Call Me Clover Dark Stampin’ Blends Marker (147024); Alpine Sports Framelits (147916); Layering Circles Thinlits (141705); Christmas Bulb Builder Punch (148013); Scalloped Tag Topper Punch (133324); Gift Bag Punch Board (135862); Softly Falling Textured Impressions Embossing Folder (139672); Shimmery White Embossing Paste (145645); Palette Knives (142808); Whisper White Polka Dot Tulle Ribbon (146912); Whisper White Solid Baker’s Twine (124262); Stampin’ Dimensionals (104430); Clear Wink of Stella Glitter Brush (141897); Multipurpose Liquid Glue (110755); SNAIL Adhesive (104332); Tear & Tape Adhesive (138995
Measurements:
- Poppy Parade: 5” x 11”
- Call Me Clover: 2” x 4 3/4” (cut 2)
- Whisper White: scraps for penguins, snowflakes and sentiment
- Pool Party: 2” x 3 1/2”
Instructions:
- Punch gift bag from Poppy Parade cardstock, following directions on punch board. (Do not punch the string holes.)
- Stamp snowflake randomly all over bag. Fold bag and adhere with Tear & Tape.
- Punch top edge of Call Me Clover panels with the Scalloped Tag Topper Punch. Adhere tags to front and back of bag with Tear & Tape.
- Stamp 6 penguins with Tuxedo Black ink; punch with Christmas Bulb Punch. Color hats and beaks with Stampin’ Blends Markers.
- Emboss Pool Party panel with Softly Falling Embossing Folder.
- Using liquid glue, adhere top penguin to embossed panel about 3/4″ down from top of panel. Adhere middle row of penguins, making sure that you cover the punched bottom of the top penguin. Adhere the bottom row of penguins.
- Apply Shimmery White Embossing Paste to bottom of penguin panel, creating a snow drift to cover bottom of penguins. Let dry completely.
- Adhere penguin panel to front of gift bag with Tear & Tape, aligning top of penguin panel with top of gift bag.
- Stamp sentiment onto Whisper White scrap with Tuxedo Black ink. Die cut with smallest Layering Circle Framelit.
- Using Alpine Sports Thinlits, die cut 2 snowflakes from Whisper White scraps. Cut one in half. Adhere to bag with Multipurpose Liquid Glue.
- Thread ribbon through tag and tie with Baker’s Twine.
- Add Clear Wink of Stella over sentiment and penguin hats.
Questions? please email me: StellarStamps@comcast.net or simply reply to this email