Dec 7, 2018 | Christmas, Holiday Catalog, Shop, Stampin Up |
The Rooted in Nature can create some wonderful rooted holiday greetings this year and always. It’s beautiful traditional green coloring and plaid background give you the traditional holiday feel. Everyone loves to feel Christmas all around them as they shop, plan and celebrate the holiday season.
All images © 1990-2016 Stampin’ Up!®
Supplies
Stamp Sets: Rooted in Nature (146482); Snowflake Sentiments (144820)
Inks: Night of Navy (147110); Old Olive (147090); Mossy Meadow (147111)
Paper: Night of Navy CS (100867), Old Olive CS (100702); Very Vanilla (101650); Under the Mistletoe DSP (146921)
Other: Dimensionals (104430)
Measurement:
• Night of Navy card stock: 5 ½” x 8 ½” scored at 4 ¼”; 3 ¼” x 2 ¼”
• Old Olive card stock: 2” x 4”
• Very Vanilla: 2” x 3”; 1 ¾” x 2 ¼”
• Plaid DSP: 3” x 4”
Instructions:
1. First of all, stamp double tree stamp in Old Olive ink in center of Very Vanilla (2×3). Also, stamp 3 single trees around the double tree in Mossy Meadow ink. Adhere to Night of Navy layer and then adhere with dimensionals to the plaid DSP layer. Next, adhere to the top half of the card base.
2. Finally, Stamp “Seasons Greetings” in Night of Navy ink on Very Vanilla (1 3/4×2 ¼). Lastly, adhere to Old Olive layer. Adhere to bottom of card base.
Dec 5, 2018 | Birthday, Christmas, Fall, Holiday Catalog, Shop, Snowflakes, Stampin Up |
It’s time for the end of year products sale opportunity. Stampin’ Up! has released their year-end close-out sale. The sale consists of retiring products and surplus products. Some products are from the holiday catalog and others are from our annual catalog. You can shop my online store and download the flyer below. These products are all on sale while supplies last so please don’t wait to get what you want.
We also have a flyer you can download below to print out and keep. This will make it much easier to keep track of what is on sale and what you want. There really is so much to choose from. 
Please remember, bundles only last during the catalog time that the products are first introduced. After that catalog’s period of time is over, the products might carry over but the bundle pricing does not. Please let me know if you have any questions about the sale or any of the products and happy shopping!
Dec 4, 2018 | 12 Weeks of Christmas, Christmas, Holiday Catalog, Shop, Stampin Up |
First of all, this adorable Washi Christmas Tree was created with the Merry Christmas to All stamp set and the Suite Season Specialty Washi Tape. It probably catches your eye because it’s such a simple yet creative card. Just another example that our Washi Tape is so decorative that you can use it to stand on it’s own.
All images © 1990-2018 Stampin’ Up!®
Supplies for the Washi Christmas Tree:
Stamps: Merry Christmas to All (147702), Touches of Texture (141934-wood or 143251-clear)
Ink: Cherry Cobbler (147083), Whisper White Craft Stampin’ Pad (147277), Whisper White Refill (101780)
Cardstock and Paper: Crumb Cake (120953), Shimmery White (101910), Silver Glimmer Paper (146960), Wood Textures 6” x 6” Designer Series Paper
Miscellaneous: Suite Season Specialty Washi Tape (148079), Garden Green Baker’s Twine (147814), Santa’s Workshop Enamel Shapes (147811), Pinewood Planks Textured Impressions Embossing Folder (143708), Bethlehem Edgelits (144676), Banner Triple Punch (138292), Stampin’ Dimensionals (104430), SNAIL Adhesive (104332), Mini Glue Dots (103683), household stapler
Measurements:
1. Crumb Cake: 4-1/4” x 11”, scored at 5-1/2” and folded in half
2. Shimmery White: 1” x 3-1/2”
3. Washi Tape: five strips in increasing lengths 1-1/2”, 2”, 2-1/2”, 3” and 3-1/2”
4. Wood Textures tree trunk: 4-1/2” x ½”
5. Silver Glimmer Paper: 2” x 1-1/2”
6. Baker’s Twine: about 9”
Instructions:
1. Stamp card base front with Whisper White ink and splatter image from Touches of Texture to simulate snowfall. Set aside to dry.
2. Run Wood Textures piece through Pinewood Planks embossing folder. Adhere to center of card with SNAIL Adhesive.
3. Affix both sentiments to an acrylic block and ink with Cherry Cobbler onto Shimmery White cardstock about 3/8” from right edge. Also, use Banner Triple Punch to create a banner end on left side. Staple right edge.
4. Align the five strips of Washi Tape horizontally across tree trunk.
5. Die cut star from Silver Glimmer Paper and Bethlehem Edgelits then adhere to top of tree trunk with Mini Glue Dots.
6. Tie twine into bow and adhere to base of star with Mini Glue Dots.
7. Affix sentiment to card base with Stampin’ Dimensionals.
8. Finally, sprinkle tree and sentiment with Santa’s Workshop Enamel Shapes as desired.
Dec 3, 2018 | Christmas, Holiday Catalog, Shop, Stampin Up |
This simple Christmas wreath was created using the Wishing You Well stamp set from the Holiday Catalog. Notice how beautiful the wreath is with some Red Rhinestone Jewels and the Red Ribbon. It creates the perfect message and is also a traditional look for the holidays.
All images © 1990-2018 Stampin’ Up!®
Supplies:
Stamps – Wishing You Well (147867W or 147864C), Star of Light (142110)
Paper – Lovely Lipstick (146970), Call Me Clover (146969), Whisper White (100730)
Stamp Pads – Lovely Lipstick (147140), Call Me Clover (147139), Granny Apple Green (147095)
Misc.- Champagne Mist Shimmer Paint (147044), Scattered Sequins Dynamic Textured Impressions Embossing Folder (146529), Big Shot (143263), Red Rhinestone Jewels (146924), SNAIL Adhesive (104332), Stampin’ Dimensionals (104430), Paper Snips (103579)
Measurements:
• Lovely Lipstick – 8 ½” x 5 ½, 4” x 5 ¼”
• Call Me Clover – 3” x 4 ¼”
• Whisper White 2 ¾” x 4”, scrap for bow
Instructions:
1. Run the layer of Lovely Lipstick through the Big Shot with the Scattered Sequins Embossing Folder and add it to the card base.
2. Ink the wreath image in Call Me Clover and stamp it near the top of the white layer. Clean the stamp and ink it in Granny Apple Green, stamp it off once, rotate it 45 degrees and stamp over the Call Me Clover image.
3. Ink the bow in Cherry Cobbler and stamp on a scrap of white, fussy cut with Paper Snips. Use a paintbrush and cover the bow with Champagne Mist Shimmer Paint, allow to dry.
4. Ink sentiment from Star of Light in Cherry Cobbler and stamp below the wreath, add this layer to the Call Me Clover layer and then to the card with dimensionals.
5. When the bow is dry, add it with a couple of dimensionals.
6. Add five red rhinestones where shown.
Nov 29, 2018 | Birthday, Fall, Holiday Catalog, Shop, Stampin Up |
Send some Fall Birthday Wishes this year when you create this lovely card. The colors are as beautiful as the Beautiful Day stamp set used to put it all together. You can also see how the colors blend so well.
All images © 1990-2018 Stampin’ Up!®
Supplies:
Stamp Sets – Beautiful Day (145915); Rooted in Nature Bundle (w: 148352, c: 148353)
Cardstock – Cajun Craze (119684); Copper Foil (142020); Delightfully Detailed Laser-cut Specialty Paper (146907); Whisper White Thick Cardstock (140272) Stamp Pads – Versamark (102283)
Misc. – Copper embossing powder (141636); Heat Tool (129053); Embossing Buddy (103093); Big Shot Die-Cutting Machine (143263); Fine Tip Glue Pen (138309); Silicone Craft Sheet (127853) ~ I used two; Multipurpose Liquid Glue (110755)
Measurements:
Cajun Craze: 4 1/4″ x 11″, scored at 5 1/2″ (base card)
Copper Foil: 3 1/2″ x 5″ and a scrap for the leaves
Delightfully Detailed: One panel ~ 3 1/2″ x 5″
Whisper White Thick: 1 1/8″ x 4 1/4″
Instructions:
1. Rub your embossing buddy over the Whisper White Thick cardstock. Stamp ‘Happy Birthday’ in Versamark, emboss with the Copper embossing powder.
2. Use the leaf embossing die to add detail to the leaves. Cut out the leaves by running through the Big Shot with the corresponding leaf die.
3. Lay the Cooper Foil on your Silicone Craft Sheet. Carefully apply glue around the back edges of the Delightfully Detailed panel and lay on the foil. Cover with your second Silicone Craft Sheet and let it dry. When dry adhere to the base card using the Multipurpose Liquid Glue (so you can move it around if necessary).
4. Add the Happy Birthday layer and the embossed copper leaves to the side.
Nov 27, 2018 | 12 Weeks of Christmas, Christmas, Holiday Catalog, Shop, Stampin Up |
This takeout chocolate Christmas box is filled with special Hershey treats. You can make it your own and probably fill it with anything on your list. You can create this for almost anyone on your list. Bring goodies with you this holiday season and make someone smile. You can also make personal items and present them in this lovely treat box. Spread some Christmas cheer.
All images © 1990-2018 Stampin’ Up!®
Supplies:
Stamp Sets – Takeout Treats (147858)
Cardstock – Thick Whisper White (140272); Copper Foil Sheets (142020
Stamp Pads – Shaded Spruce (147088)
Misc. – Joyful Noel Designer Series Paper (147816); Takeout Thinlits (147927); Subtle Embossing Folder (143706); 1/8” Circle Punch (134365): Linen Thread (104199); Copper Trim (144179); Metallic Ribbon Combo (146329); Tear & Tape Adhesive (138995)
Instructions:
1. Using the Joyful Noel DSP, cut TWO pieces of the take out box. Fold on all score lines and adhere the bottom and the sides with Tear & Tape Adhesive
2. Cut 10-12” of the Shaded Spruce ribbon from the Metallic Ribbon Combo pack. Slip it underneath the top tab (bringing it through the slit) and tie a bow.
3.Next, cut 10-12” of Copper Trim, slip underneath the top tab and tie another bow.
4. Stamp sentiment in Shaded Spruce ink onto Whisper White Thick cardstock and cut it out with the tag die from the Takeout Thinlits.
5. Also, cut one tag from a Copper Foil sheet with the same thinlit die and emboss it with the Subtle embossing folder. (If making multiple treat boxes you can emboss several tags at once).
6. Holding the Copper Foil Tag and the Thick Whisper White tag together, use the 1/8” Circle punch to punch a circle at the top.
7. Finally, cut TWO 10-12” pieces of Linen Thread, slip it underneath the Copper Trim bow and slip the other end through both tags and tie with a bow.
This box holds TEN (10) Hershey’s Chocolate Kisses!
