Mar 26, 2019 | Birthday, Friends, Shop, Spring, Stampin Up, Tutorial |
Let them indulge with a sweet birthday surprise delivered right to their door. In addition, they can enjoy the variety of color you have used with the Sweetest Thing stamp set. It’s another wonderful and very colorful card because you want them to feel special. It’s also so fun to make. Having candy as the focal point allows the color to stand out.
All images © 1990-2017 Stampin’ Up!®
Another probably maybe, and so because lastly
Supplies:
Stamp Sets – Sweetest Thing (148575)
Card Stock – Smoky Slate (131202), Whisper White (100730), Rich Razzleberry (115316)
Stamp Pads – Momento Tuxedo Black (132708), Rich Razzleberry (147091)
Misc.: Gingham Gala 6” x 6” Designer Series Paper Stack (148554), Stampin’ Blends: Blackberry Bliss Light (147909), Daffodil Delight Light (144586), Call Me Clover Light (147023), Pumpkin Pie Light (144578), Happiness Blooms Enamel Dots (148805), SNAIL Adhesive (104331), Stampin’ Dimensionals (104430)
Measurements:
• Smoky Slate – 4 ¼” x 11” – score at 2 ¾” and 5 ½” , 3 ½” x 3 ½”
• Whisper White – 3 ¼” x 3 ¼”, 4” x 5 ¼”
• Daffodil Delight Gingham Gala Designer Series Paper – 2 ½” x 4”
• Rich Razzleberry – 1” x 3” strip – “flag” one end
Instructions
1. First of all, fold Smoky Slate card base in half at 5 ½”. Fold right edge back towards fold on the 2 3/4” fold line creating a Z-fold card.
2. Adhere the Gingham Gala paper to the front panel of card base.
3. Stamp the center jar in Momento Black in on the small piece of Whisper White card stock.
4. Then, stamp the same image onto a post it note so the top of the image will have the adhesive on the reverse side. Cut out the image.
5. Place the post it image over top of the same image stamped on Whisper White.
6. Next, stamp the other jar image on either side of the center image.
7. Leaving the post note adhered, stamp the jelly bean image inside the left jar and the gummi bears inside the right image.
8. Remove post-it mask and stamp the mixed candy image inside the center jar.
9. Use Stampin’ Blends to color images as shown.
10. Attach the stamped panel to the 3 ½” x 3 ½” Smoky Slate card stock with adhesive.
11. The Rich Razzleberry strip gets adhered to the back of panel referring to the photo for placement.
12. With Stampin’ Dimensionals, adhere completed piece to card front as shown.
13. Stamp the “Happy Birthday” image in the bottom right corner using Rich Razzleberry ink.
14. Put inside panel on card base with adhesive.
15. Lastly, add Enamel Dots to top right corner and enjoy.
Mar 25, 2019 | Congratulations, Flowers, Friends, Sale-A-Bration, Shop, Spring, Stampin Up, Tutorial |
Send a unique congratulations with this beautiful card created with the Bloom By Bloom stamp set. When you add the Circle Framelits, you have the illusion of a ring. Congratulate the happy couple and show them that you can think outside the box. It’s an amazing inspirational journey you can travel when creating your own cards. Also, take advantage of the last days of Sale-a-Bration with the DSP used on this card.
All images © 1990-2019 Stampin’ Up!
Supply:
Stamp Sets: Bloom by Bloom (148820), Itty Bitty Birthdays (148618), Florentine Filigree (148822)
Card Stock: Whisper White (100730),
Stamp Pads: Lovely Lipstick (147140), Call Me Clover (147139), Memento Black (132708)
Misc: Stampin’ Dimensionals (104430), Multipurpose Liquid Glue (110755), Banner Triple Punch (138292), Sale-a-Bration FREE: Botanical Butterfly DSP (149622), Big Shot: (143263), Layering Circles Framelits (141705), Happiness Blooms Enamel Dots (148805)
Measurement:
• Whisper White: 4 1/4” x 11”, 5 1/2” x 4 1/4” for the Florentine Filigree circle, flower and leaves
• DSP: 1” x 3 1/2”
Instructions:
1. Score and fold the Whisper White card base at 5 1/2”.
2. On the 5 1/2” piece of Whisper White, stamp the Florentine Filigree large circle and cut it with the largest Layering Circle and then cut again with a smaller one to create the outline image.
3. Stamp the large flower and three leaves on the remaining portion and fussy cut.
4. With the Banner Triple punch, add a banner to one edge of the DSP as shown.
5. Position the DSP as shown and adhere the circle to the card base. Stamp
6. “Happy Day” above the DSP in Memento Black ink.
7. Add Dimensionals to the flower and leaves and position on the card.
8. Lastly, add the Happiness Blooms Enamel Dots in Lovely Lipstick.
Mar 24, 2019 | Birthday, Flowers, Friends, Shop, Spring, Stampin Up, Tutorial |
Take advantage of the musical moments and a special card. Also, when words are too much to say, let the Lasting Lily say them for you. As a result, the card speaks to you because the Sheet Music background stamp set compliments the card so well. So it helps bring it to life and make an impact. Another way to make it pop is to use the right color for the lily.
All images © 1990-2019 Stampin’ Up!®
Probably, maybe and as well as also put another
Supplies:
Stamp Sets – Lasting Lily- SAB 2019 (149717), Sheet Music (143970)
Card Stock – Whisper White (100730); Berry Burst (144243); Mossy Meadow (133676)
Stamp Pads – Smoky Slate (147113); Berry Burst (147143); Basic Gray (149165); Mossy Meadow (147111)
Misc. – Berry Burst Metallic Edge Ribbon (145489)
Measurements:
● Mossy Meadow: 8 ½” x 5 ½ ”
● Berry Burst : 5 ⅛” x 3 ⅞”
● Whisper White: 4 ⅞” x 3 ⅝” (plus 4” x 5 ¼” for inside card)
● Berry Burst Ribbon: 17”
Instructions: to also add another probably therefore
1. Lay Sheet Music stamp face up on flat surface. Add Smoky Slate ink to stamp and lay smaller piece of white card stock on top. Cover with scratch paper and rub ink all over card stock. Remove card stock from the stamp. (TIP: Stamp a line or two of music from the TOP of the stamp onto the BOTTOM of the larger piece of white card stock for the inside card layer)
2. On right side of the stamped paper stamp flowers in Berry Burst and add stems and leaves in Mossy Meadow ink. (TIP: Using a Stamparatus for the flowers will enable you to get them in the same place every time!)
3. The sentiment is stamped on the left side using Going Gray ink. and another maybe as well as first of all
4. Adhere stamped layer onto Berry Burst card stock and tie the ribbon in a bow on front.
5. Lastly, attach the front of the card to the card base and layer to the inside of the card. and also another
Mar 21, 2019 | Flowers, Friends, Shop, Spring, Stamparatus, Stampin Up, Tutorial |
With Spring upon us, what could be more beautiful than vintage style cards. Create many of these Vintage Flowers for your friends and family. You can also change up the colors and sentiment and you can use them for any occasion.
All images © 1990-2019 Stampin’ Up!®
Also, maybe you and probably another and lastly
Supplies:
Stamp Sets – Very Vintage Clear-Mount [146801]/Wood-Mount[146798]; Itty Bitty Greetings Clear-Mount [146667]/Wood-Mount [146664]; Sheet Music Wood-Mount [143967]/Clear-Mount [143970]
Card Stock – Smoky Slate [131202]; Powder [144244]; Whisper White [100730]
Stamp Pads – Lovely Lipstick [147140]; Jet Black [101406]; Smoky Slate [147113]
Misc.- SNAIL Permanent Adhesive [104332]; Glue Dots [103683]; Big Shot [143263]; Stamparatus [146276]; Silver Glimmer Paper [146960]; Be Mine Stitched Framelits Dies [148527]; Twine Baker’s Whisper White [124262]; Classic Label Punch [141491]; Stampin’ Dimensionals [104430]
Measurements:
• Smoky Slate: 11” x 4 ¼”
• Silver Glimmer Paper: 4 ¼” x 3”
• Whisper White: 4 1/8” x 3”; ½” x 2 ½”
• Powder Pink: 4 ¼” x ½” (two pieces)”; 3” x 1”
Directions:
1. First of all, fold Smoky Slate in half to create card base.
2. Use border dies from “Be Mine Stitched Framelits” along 4 ¼” side of the Silver Glimmer Paper. Glue Powder Pink card stock strip along top and bottom of Silver Glimmer paper and adhere to bottom portion of the card base.
3. Then, you stamp flower image from “Very Vintage” set onto Whisper White layer using Lovely Lipstick ink.
4. Stamp sheet music with Smoky Slate on 3” x 1” Powder Pink card stock and glue to Whisper White layer. Wrap twine around, securing in back. Add a bow with a glue dot and place a rhinestone in the center. Adhere to card with Stampin’ Dimensionals.
5. Lastly, stamp sentiment from “Itty Bitty Greetings” with Stazon onto 2 ½” x ½” Whisper White card stock. Cut and flag with Classic Label Punch and place on the card with dimensionals.
Mar 20, 2019 | Birthday, Flowers, Friends, Shop, Spring, Stampin Up |
This beautiful Floral Romance Lace Card is perfect for showing them you care enough to make it yourself. The detail is created with an embossing folder. Add the seals for extra detail and you have yourself the perfect card.
All images © 1990-2019 Stampin’ Up!®
Supplies:
Stamp Sets – Wonderful Romance (148632c)
Card Stock – Very Vanilla (101650); Pear Pizzazz (131201)
Stamp Pads – Pear Pizzazz (147104)
Misc – Big Shot Die-Cutting Machine (143263); Lace Dynamic Textured Impressions Embossing Folder (148530); Floral Romance Specialty Designer Series Paper (148586); Floral Romance Seals (148789); Gold Foil Paper (132622); Stampin’ Dimensionals (104430)
Measurements:
• Very Vanilla CS: 5-1/2” x 8-1/2″; 3-3/4” x 5”; ¾” x 2-3/4”
• Pear Pizzazz CS: 5-1/4” x 4″
• Gold Foil: 1” x 3”
• Floral Romance DSP: 3/8” x 3”; 1/2″ x 3-1/2”; 3/4″ x 3-1/4”
Instructions:
1. Score Very Vanilla cardstock at 4-1/4” then fold to create card base.
2. Adhere Pear Pizzazz CS to card front.
3. Emboss Very Vanilla CS layer with the Lace Dynamic TIEF and the Big Shot. Add embossed layer to card front.
4. Trim ends of Floral Romance DSP at an angle. Adhere layers; Add to card front.
5. Add Floral Romance Seal over top layered DSP strips.
6. Stamp sentiment using Pear Pizzazz ink onto Very Vanilla CS piece.
7. Layer stamped piece to Gold Foil.
8. Add stamped unit to card front using Stampin’ Dimensionals.
Mar 19, 2019 | Birthday, Flowers, Friends, Shop, Spring, Stampin Up, Tutorial |
You can create vibrant flowers using your Vibrant Vases stamp set. I love how flowers pop off the card and just make you smile. The sentiment says it all and the colors that you use, let them know you took the time to make them perfect.
All images © 1990-2019 Stampin’ Up!®
Supplies:
• Stamp Sets – Vibrant Vases (148656);
• Card Stock – Whisper White Thick (140272)
• Stamp Pads – Memento Tuxedo Black (132708); Pool Party (147107); Granny Apple Green (147095); Gorgeous Grape (147099)
• Misc. –SAB Botanical Butterfly Designer Series Paper (149622); Silver Metallic Thread (138402); Glitter Enamel Dots (146934); Big Shot (143263); Stitched Labels Framelits (146828); Stitched Shapes Framelits (145372); Vases Builder Punch (147040); Stampin’ Dimensionals (104430); Mini Glue Dots (103683); Mini Dimensionals (144108)
Measurements:
• Whisper White Thick: 8-1/2” x 5-1/2” (score 4-1/4”); & 3” x 4” – (x2)
• SAB Botanical Butterfly DSP: 5-1/4” x 4”
• Metal Thread Ribbon: 20”
Instructions:
1. Score Whisper White card base at 4-1/4”, fold in half to create card base.
2. Adhere the DSP to the card base.
3. Taking the 2nd largest Stitched Circle and the tag from Stitched Labels and the 3”x4” piece of Whisper White, run through Big Shot and die cut both pieces.
4. Stamp the greeting image on the white tag with Memento Tuxedo Black Ink.
5. With the 3”x4’ piece of Whisper White, ink the vase with Pool Party, the leaves with Granny Apple Green. Ink the outline image of the tulips with Memento Black and then the inside tulip image with Gorgeous Grape. Punch all shapes with the Vase Builder punch.
6. Adhere the Silver Metallic Thread to the circle with adhesive.
7. Assemble the vase and flowers and tulips with mini glue dots and mini dimensionals; then adhere to the circle with dimensionals. Adhere to the greeting tag with dimensionals.
8. Add a few of the Gorgeous Grape Glitter Enamel Dots.
