Pink Flowered Birthday

This beautiful pink flowered birthday card is delicate and decorated for someone special.  You can create a handful for all the special people you want to celebrate with this year.  I love to create a card stash at the beginning of each year, however, it means changing up colors and designs as well. After that, you just put all your creations together in a safe place to use throughout the year.  Lastly, always have fun.


All images © 1990-2019 Stampin’ Up!®

Supplies:
• Stamp Sets: Happy Birthday To You (152308)
Cardstock: Whisper White (100730), Basic Gray (121044), Fluid 100 Watercolor Paper (149612)
Ink: Flirty Flamingo Classic Stampin’ Pad (147052), Soft Sea Foam Classic Stampin’ Pad (147102), Jet Black StazOn Pad (101406), VersaMark Pad (102283), Dark Smoky Slate Stampin’ Blends (145055)
• Tools & Accessories: Heat Tool (129053), Embossing Buddy (103083), Shimmer Black Stampin’ Emboss Powder (149512), Aqua Painter (103954), Sponge Brayer (141714), Basic Pattern Decorative Masks (150697), Delightful Tag Topper Punch (149518), Stitched Shapes Dies (145372)
• Designer Paper: Brights 6” x 6” Designer Series Paper (149613)
• Misc: 3/8” Glittered Organdy Ribbon (147897), Mini Glue Dots (103683), Paper Snips (103579)

Measurements:

• Card Base: Whisper White 4-1/4” x 11”, scored and folded at 5-1/2”
• Cardstock #2: Fluid 100 Watercolor Paper 4-1/4” x 5-1/2”
• Cardstock #3: Basic Gray 3-1/2” x 3-1/2”
• Designer Paper: Flirty Flamingo gingham 2” x 5-1/2”

Instructions:

• First of all, on the front of the card base, use the dotted decorative mask and apply Flirty Flamingo ink using the sponge brayer.
• Cut one end of the Flirty Flamingo gingham DSP with the Delightful Tag Topper Punch and adhere to card base in the center.
• On the watercolor paper make a light Flirty Flamingo watercolor wash with the Aqua Painter. Set aside to dry or use the Heat Tool on low setting to speed up the drying.
• Cut the Basic Gray cardstock with the largest Stitched Shapes circle.
• Rub the Embossing Buddy over the (dried) watercolor paper, then stamp the cake image using VersaMark ink. Cover with Shimmer Black Embossing Powder, tap off excess, and heat with Heat Tool.
• Squeeze the Flirty Flamingo and Soft Sea Foam ink pads so the foam pad applies ink to the insides of the lids. Use an Aqua Painter to pick up the ink to darken the blossoms and add color to the leaves.
• Fussy cut the cake and adhere to gray circle, then pop up on dimensionals on gingham tag.
• Lastly, stamp greeting at bottom of tag with black StazOn. Tie a bow with the glittered ribbon and adhere at top of tag with a glue dot.

Celebrate With Style

You can celebrate in style with the Sip Sip Hooray stamp set.  The colors of the glasses add character to the card and anyone would remember it in years to come.

All images © 1990-2019 Stampin’ Up!® 

Supplies:

  • Stamp Sets: Sip Sip Hooray (150526) or bundled with dies at a discount (153045), Itty Bitty Birthdays (148618)
  • Cardstock: Thick Very Vanilla (144237), Gorgeous Grape (146987), Mossy Meadow (133676), Cherry Cobbler (119685), Pumpkin Pie (105117), Basic Black (121045)
  • Ink: VersaMark
  • Tools & Accessories: Black Stampin’ Emboss Powder (146956), Embossing Buddy (103083), Heat Tool (129053), Sip & Celebrate Dies (150668) or bundled with stamp set at a discount (153045), Ornate Frames Dies (150664), SNAIL Adhesive (104332), Multipurpose Liquid Glue (110755), Stampin’ Dimensionals (104430)      

Measurements: 

  • Card Base: Thick Very Vanilla 5-1/2” x 8-1/2”. Fold in half.
  • Cardstock #2: Basic Black 3-1/2” x 4-3/4”
  • Cardstock #3: Thick Very Vanilla 3-3/8” x 4-5/8”, scrap for die-cutting.
  • Cardstock #4: Gorgeous Grape scrap. Die-cut.
  • Cardstock #5: Mossy Meadow scrap. Die-cut.
  • Cardstock #6: Cherry Cobbler scrap. Die-cut.
  • Cardstock #7: Pumpkin Pie scrap. Die-cut.

Instructions:

  • Die-cut Gorgeous Grape, Mossy Meadow, Cherry Cobbler and Pumpkin Pie cardstocks with Sip & Celebrate Dies. Adhere to Very Vanilla layer with liquid adhesive. Clip away excess cardstock that extends beyond layer. (See image below)
  • Adhere Very Vanilla layer to Basic Black layer. Adhere layers to card front with dimensionals.
  • Stamp sentiment image from Sip Sip Hooray stamp set on scrap Very Vanilla with Versamark ink. Heat emboss with Black Emboss Powder. Die-cut with Ornate Frames Dies. Adhere to card front with Stampin’ Dimensionals.
  • Stamp sentiment image from Itty Bitty Birthday stamp set on card inside with Versamark ink. Heat emboss with Black Emboss Powder. (See image below)

Remember, you do not have to invent the wheel to be creative, just copy this project! Did you make it with your own hands? Then you have created!

Order by clicking on any image in this email or by linking to my ONLINE STORE.

Special Birthday Event

TODAY ONLY – 24-hour FLASH SALE – For a SPECIAL BIRTHDAY EVENT!

This is RARE. Stampin’ Up! does this, maybe, once per year.

 

This aspect/option is HUGE: if you buy a Starter Kit this Wednesday, YES, these sale stamp sets MAY be added. Let’s say you fill your $125 kit on this day with only stamps on sale, it would then be as if you were putting $147 in that cart but you only pay $99. That’d be $48 in FREE product AND it ships free saving you another $14.70 if you were placing this as an order instead.

For $99 you are always getting more than $99 but, for this one day, the value  jumps up if you fill your kit strategically!

Do you have $99 you could order right now? Then do it Wednesday and get up to what would ordinarily be $147 for that $99 instead. You can choose ANYTHING you want. You don’t have to choose the flash sale stamp sets. Use the pink button at the bottom of this email on Wednesday and save a bunch of $!

Flash Sale suggestions:

  1. Shop for yourself
  2. Shop for family as holiday gifts
  3. Shop for your favorite crafter whoever they are
  4. Shop via a Starter Kit as mentioned above

Please refer to my frequently asked questions about joining HERE. Note that you don’t have to “demonstrate” anything or have parties. You can be your only customer and just do this for the discount. Most Demonstrators are in that category and it’s totally welcomed!

Link to this flyer HERE that lists all 56 stamp sets that will be on sale for 24 hours during this special birthday event.

Fairy Birthday Celebration

Have a fairy birthday celebration with this adorable card.  The colors are so soft and the background is very colorful with pastels.  You can change up the colors and coordinate with the colors on the fairy.  Send it to your favorite little princess and bring a smile to her face. 

All images © 1990-2019 Stampin’ Up!®

Supplies:
Stamp Sets – New Wonders Cling Stamp Set [149426]
Card Stock – Whisper White [100730], Basic Black [121045]
Stamp Pads – Rococo Rose [150080], Seaside Spray [150085], Pretty Peacock  [150083], Versamark Pad [102283], Jet Black Stazon Ink Pad [101406], So Saffron  [147109], Daffodil Delight  [147094], Smoky Slate  [147113]
Misc.- Embossing Buddy [103083], Heat Tool [129053], White Stampin’ Emboss Powder [109132], SNAIL Permanent Adhesive [104332], Aqua Painters [103954], Fine-Tip Glue Pen [138309], Sponge Daubers [133773], Clear Block Bundle [118491], Dazzling Diamonds Stampin’ Glitter [133751]

Measurements:

  • Basic Black: 8 ½” x 5 ½”
  • Whisper White: 4” x 5 ¼”
Instructions:
  1. Fold Basic Black card stock in half to create card base.
  2. Rub Embossing Buddy over Whisper White card stock layer. Ink leaves with Versa mark ink pad and stamp along the left side. Repeat until you have desired amount of images. Sprinkle with White Embossing Powder, shake off excess and set with the heat tool. Use sponge daubers to add ink over the embossed images (Rococo Rose, Seaside Spray, and Pretty Peacock). Wipe off any excess ink.
  3. Ink fairy image with Black Stazon and stamp onto Whisper White layer. Stamp sentiment with Black Stazon.
  4. Use aqua painter with ink pads to color in the fairy.
  5. Add fine-tip glue to fairy’s wings and sprinkle with a bit of Dazzling Diamonds Glitter.

Fun Dino Birthday Card

Create a fun Dino birthday card and earn a million smiles.  This is not only cute as a button, but it’s also colorful and energetic.  Let your imagination lead the way.  You can even get the kiddies involved and let them have some fun.  The images in the Dino Days stamp set can help you create various scenes.  You can add different Designer Series Paper as well for a variety of ideas.


All images © 1990-2019 Stampin’ Up!®

Supplies:
Stamp Sets – Dino Days (149406); Itty Bitty Birthdays (148618)
Card Stock – Whisper White (100730); Pretty Peacock (150880); Blushing Bride (131198)
Stamp Pads – Pretty Peacock (150083); Pineapple Punch (147141); Flirty Flamingo (147052)
Misc. – Dinoroar Designer Series Paper (DSP) (149589); Stampin’ Dimensionals (104430); SNAIL (104332); 3/8” Denim Ribbon (6”)(149590); Layered Leaves 3D (152321); Dino Dies (149636); Die Cutting Machine. Basic Black Stampin’Write Marker (100082)

Measurements:
· Whisper White: 5 ½ x 8 ½” (score and fold at 4 ¼”); ½ x 3 ½”; 3 x 4”
· Pretty Peacock: 5 3/8 x 4 1/8”
· Blushing Bride: 5 ¼ x 4”
· Dinoroar DSP: 1 ½ x 5 ¼”

Instructions:

1. Emboss Blushing Bride cardstock with the Layer Leaves 3D folder.
2. Next, stamp the greeting with Pretty Peacock ink.
3. Stamp Dinosaur with Pineapple Punch ink. Stamp the scales with Flirty Flamingo. Cut out with Dino Dies and Die Cutting Machine.
4. Attach card layers onto Whisper White card base using SNAIL adhesive. Attach Ribbon and Greeting with Snail Adhesive.
5. Lastly, adhere the Dinosaur to card with Stampin’ Dimensionals. Add eye with Marker and you have your fun dino birthday card.

Over the Moon 3D Image

Create an over the moon 3D image with this fun card.  The daisy flowers on the front add a 3D element that is adorable.  You can add any sentiment to express your personal message.  The colors have a nice natural farm feel.


All images © 1990-2019 Stampin’ Up!®

Supplies:
Stamp Sets – Over the Moon (149331)
Card Stock – Thick Whisper White Cardstock (140272); Whisper White Cardstock (100730); Pineapple Punch Cardstock (146971); Fluid 100 Watercolor Paper (149612); Pressed Petals Specialty Designer Series Paper (149500)
Stamp Pads – Staz-On Jet Black (101406); Pineapple Punch (147141); Balmy Blue (147105); Soft Suede (147115); Garden Green (147089); Lovely Lipstick (147140)
Misc. –Stitched Shapes Dies (145372); Medium Daisy Punch (149517); Perennial Essence Floral Centers (149442); Linen Thread (104199); Aqua Painters (103954); Sponge Daubers (133773); Snail Adhesive (104332); Mini Glue Dots (103683); Stampin’ Dimensionals (104430)

Measurements:

· Thick Whisper White Cardstock: 4 ¼” x 11” scored at 5 ½”
· Whisper White Cardstock: 6” x 3 ½” for flowers
· Pineapple Punch Cardstock: 4” x 5 ¼”
· Fluid 100 Watercolor Paper: 2 ½” x 2 ½” (approx.) to die cut with 2 1/8” stitched square
· Pressed Petals Specialty DSP: 3 7/8” x 5 1/8”

Instructions :

1. Fold thick Whisper White card base in half and set aside.
2. Attach the Pressed Petals Designer Paper piece to the Pineapple Punch piece of cardstock with Snail adhesive. Then, wrap linen thread around the middle of the layer and tie a bow. Attach the layer to the card front with snail adhesive.
3. Use the medium Daisy Punch and cut 6 flowers from the 6” x 3 ½” piece of Whisper White Cardstock. Use a sponge dauber and Pineapple Punch ink pad to ink the centers of the punched flowers a little. Then, stack two flowers a little off to make the flower look fuller and stick together with a glue dot. Make 3 full flowers with 2 punched pieces each. Attach to the card front with glues dots as show in the picture.
4. Die cut a 2 1/8” square from the Fluid 100 watercolor paper with the Stitched Shapes Dies. Then, stamp the cow using Staz-On ink.
5. With the Aqua Painter, color the cow image. I used Balmy Blue for the sky, Soft Suede for the cow, Lovely Lipstick for the ears and nose and the tip of her boot, Pineapple Punch with a little Soft Suede for the hair and flower, and Garden Green for leaves.
6. Finally, attach that square to the card front with Stampin’ Dimensionals to complete your over the moon 3D image.