I love this picture perfect card for all your photography friends and family. It’s a great way to encourage them and add a little of what they know to the card. The camera is one of my favorite parts of the card. Color it however you choose.
Supplies: Stamp set: Capture the Good (150388) Cardstock & Paper: Rococo Rose (150882), Shimmery White (101910), 2019-2021 In Color 6” x 6” Designer Series Paper (149617), Silver Glimmer Paper (146960) Ink: Basic Gray (149165) Miscellaneous: Stitched Nested Labels Dies (149638), 1-1/2” Circle Punch (138299), 1” Circle Punch (119868), ½” Circle Punch (119869), Rococo Rose ½” Scalloped Linen Ribbon (149704), Black ½” Satin Ribbon (146280), 2019-2021 In Color Faceted Dots (149607), Stampin’ Dimensionals (104430), Multipurpose Liquid Glue (110755), Mini Glue Dots (103683), Bone Folder (102300), Paper Snips (103579), die-cutting machine
Measurements: • Rococo Rose card base: 5-1/2” x 8-1/2” scored at 4-1/4” then folded in half with a Bone Folder plus a scrap to stamp sentiment on that you will cut down after you stamp it – about 2-3/4” x 1-1/2” • Designer Series Paper: Rococo Rose sheet 4” x 5-1/4” • Shimmery White: main camera needs 3-1/2” x 2-3/4” plus 2 scraps that you can stamp the lens on two times so you can punch out two circles in different sizes • Silver Glimmer Paper: scrap that you can punch a ½” circle out of • Ribbon: Black ½” Satin – about 8”; Rococo Rose ½” Scalloped Linen – about 7” for small bow
Instructions:
1. Stamp camera with Basic Gray ink three times on three pieces of Shimmery White cardstock: one needs to be the whole camera with room to cut it out plus two more focusing on the lens as you will punch those out. 2. Using 1-1/2” Circle Punch and 1” Circle Punch, punch out two circles from the two of the stamped lens images. 3. Punch Silver Glimmer Paper with ½” Circle Punch. 4. With Stampin’ Dimensionals, adhere the two camera lens circles on top of one another and the main camera. Using Multipurpose Liquid Glue, adhere the Silver Glimmer Paper and set aside to dry. 5. Stamp sentiment with Basic Gray onto scrap Rococo Rose then die cut with one of the Stitched Nested Labels Dies aligning so that sentiment is aligned towards the bottom to leave room for ribbon bow later. 6. Attach 3 Rococo Rose Faceted Dots to bottom of the sentiment. 7. WIth your SNAIL, adhere ends of Black Satin Ribbon to back of the camera. 8. Add Stampin’ Dimensionals to camera and attach to card. 9. Align camera “strap” askew and hold it down in a few places with SNAIL. 10. Put Stampin’ Dimensionals on sentiment piece and place over left camera strap. 11. Lastly, tie Rococo Rose Scalloped Linen Ribbon in a small bow, trim ends with Paper Snips then attach to stop of sentiment with Mini Glue Dots.
Have some fun with a push pop celebration. Create this adorable, fun project for any occasion. You can create them for party favors or maybe even a special occasion at school. It’s bound to be a celebration no matter what you put in them.
Supplies: Stamp Sets – Little Elephant (145728) Card Stock – Whisper White Card Stock (100730); Pineapple Punch Card Stock (146971); Gorgeous Grape Card Stock (146987) Stamp Pads – Coastal Cabana Ink Pad (147097); Gorgeous Grape Ink Pad (147099) Misc. – Pineapple Punch 1/8” Grosgrain Ribbon (146971); Whisper White 5/8” Polka Dot Tulle Ribbon (146912)); Brights Stampin’ Write Markers (147157); 2” Circle Punch (133782); Starburst Punch (143717); Dimensionals (104430); Bone Folder (102300); Tear & Tape Adhesive (138995); round Push Pop container
Measurements: · White Card Stock: Scrap to stamp and punch out · Pineapple Punch Card Stock: 3” square · Gorgeous Grape Card Stock: 6” x 1-3/4” · Ribbon: 17” of each
Instructions:
1. Stamp the small elephant using Coastal Cabana ink on white card stock. Use markers to color balloons then stamp in elephant’s trunk. Stamp greeting in Gorgeous Grape ink. Punch out the image with 2” punch. 2. Punch a starburst out of the Pineapple Punch card stock and adhere to the back of the stamped circle. 3. Use the bone folder to “curl” the Gorgeous Grape strip of card stock, then adhere it around the bottom of push pop container using Tear & Tape. Directions 4. Tie ribbons around the grape strip with a bow on the front. 5. Use a bone folder to curl starburst circle, then attach to the front of the container using dimensionals.
You can make a beautiful flower slider card using our Magnolia bundle. There is so much in this bundle and you get 10% off the bundle when you purchase it. The Designer Series Paper is simply beautiful. Take a look below at the tutorial for this slider card.
Supplies: Stamps – Good Morning Magnolia Bundle (151087) Card Stock – Mossy Meadow (133676), Whisper White (100730), Magnolia Lane DSP (149484), Black Foil (147898) Misc. Big Shot (143263), Big Shot Magnetic Platform (130658), Layering Circle Framelits (141705), Snail (104332), Glue Dots (103683), Tear and Tape (138995), Dimensionals (104430), Mossy Meadow Stamp pad (147111), Memento Pad (132708), Mossy Meadow Blends Combo (147171), Petal Pink Blends Combo (147272), Petal Pink Organd Striped Ribbon (149441), Wink of Stella (141897), Pearls (144219), Story Label Punch (150076)m1: Circle Punch (119868), Simply Scored (122334)
Measurements: • Card Stock 1: Mossy Meadow Base 41/4 x 6, (You need TWO) Score one at 11/2 on long side, scrap for punch, 21/2 x 11/4, score ½” on 21/2” side, 23/4 x 1 Score ½ & 2/14 on 23/4” side, 11/2 x ½ Score at ½ & 1 • Card Stock 2: Whisper White layer 4 x 5 3/4, Scrap for Magnolia and Hello • Card Stock 3: Black Foil, Scrap • Paper: Magnolia DSP 9 1/4 x 1 1/2 , 4 x 4 1/4
Instructions:
Using Big Shot and Layering Circle Framelits, cut a 1 ¼” circle from Whisper White scrap after you stamp your Hello. Cut a 1 3/8” circle using black foil. Layer on punched Mossy Meadow Story Label Punched piece using dimensionals. Adhere two pearls (colored using a black sharpie).
Stamp Whisper white layer with small Magnolia and color using blends. Stamp Phrase using Mossy Meadow. Make sure you stamp about ¾” from the bottom. Adhere to Mossy Meadow Layer.
Attach Layer of DSP to Mossy Meadow piece. Line up the two layers and using Tear Tape adhere Decorative strip of DSP to front 1 ½” Scored area. Gently fold over the sides to the back and adhere using Tear Tape. This should NOT be super tight.
Slide out the bottom layer and punch out a little less than a half circle using the 1” circle punch. Slide back layer back in place.
On ½” piece adhere two small pieces of Tear Tape on each end. On 2 ½ x 1 ¼ adhere tear tape on ½” end. On 2 ¾ x 1 adhere Tear tape on one end and then flip over and adhere tear tape on opposite end. (Like front and back)
Stamp, Color and Cut out using Framelits and Big Shot the Magnolia. Color using the Wink of Stella.
On Front center, fold up front layer and adhere 2 ½ by 1 ¼ piece against the score line of the card. Then adhere the 1 ½ x ½” piece (like an N) one end will be attached to the card front and the other side to the piece you just stuck in place. Adhere your colored Magnolia at an angle to this “pop up” piece. Adhere your bow using a Glue dot.
On the back layer, adhere your 2 ½ x 1/14 piece approx 1” down from the top and centered. Then adhere the other end (Tear Tape should be visible) to the back of the top layer. This should just lay flat, and will slide up as you slide the card up in the propped up position.
Adhere your punched layer from step 1 to the top right of the card front.
You have so many travel fun pieces when you use the truck ride dies from the Ride with Me bundle. The possibilities are endless. Take a look at the video below and follow Natalie as she shows you the fun you can have with this bundle.
The projects are adorable the dies are so much fun to play with. Create your own 3D trucks and use your imagination. You can pick up the bundle in my online store here. Take a look at the bundle below.
Send loving wishes to your friends and family with this beautiful heirloom card. Its elegance is overwhelming and beautiful. I love creating things that have an antique look and feel. The Woven Threads Designer Series Paper can give you so many beautiful heirloom type projects.
Supplies: Stamp set: Woven Heirlooms (149306) or as a bundle with dies (151093) or choose the entire Woven Threads Suite (152184) Cardstock and paper: Rococo Rose Cardstock (150882), Seaside Spray Cardstock (150883), Whisper White Cardstock (100730), Woven Threads Designer Series Paper (149497) Ink: Seaside Spray (150085) Miscellaneous: Heirloom Frames Dies & 3D Embossing Folders (152325), 5/8” Woven Threads Trim (149499), Woven Threads Sequin Assortment (149498), (149491), Stampin’ Dimensionals (104430), SNAIL Adhesive (104332), Mini Glue Dots (103683), Paper Snips (103579), Simply Scored Scoring Tool (122334), Bone Folder (102300), die-cutting machine, household tape
Measurements: • Seaside Spray card base: 4-1/4” x 11”, scored at 5-1/2” then folded in half with a Bone Folder plus a piece 3-1/2” x 4-1/2” • Whisper White: 2-3/4” x 3-3/4” • Rococo Rose: 4” x 5-1/4” • Designer Series Paper: 3-3/4” x 5” • Ribbon: two pieces each about 3”
Instructions:
1. Using SNAIL adhere Designer Series Paper to Rococo Rose then that piece to the Seaside Spray card base. 2. Stamp sentiment with Seaside Spray on Whisper White. 3. Die cut frame first then run through embossing folder. Align sentiment behind frame and adhere with SNAIL and household tape 4. Wrap ribbon around two opposing corners and secure in back with Mini Glue Dots plus one dot in front, beneath the ribbon, to hold it in place. 5. Using Mini Glue Dots and your Paper Snips, like tweezers, affix a sequin onto a Mini Glue Dot then remove and place randomly on ribbon. Repeat as desired. 6. Take Stampin’ Dimensionals and attach frame piece to card front.
Any perfect precious parcel can be created with love. It just takes a few steps and some Stampin’ Up! products. I love the new Perfect Parcel Dies and all the possibilities they bring to us. It’s always special when you create hand made gifts.
Measurements: · Whisper White: 4 1/4” x 6-1/2” (2 pieces) + scrap for stamping · Terracotta Tile: 7-3/4” x 2” + scrap · Woven Threads DSP: 7-3/4” x 1-3/4”
Instructions:
1. Die cut the two pieces of Whisper White card stock with the large box die in the Perfect Parcels die set. 2. Using Seaside Spray ink and the floral stamp from Verdant Garden, stamp the image repeatedly over the die cut pieces. 3. Fold box pieces on all score lines. All are folded in, except for the triangle on the long piece with the curve – this one is folded out. 4. Add Tear & Tape Adhesive to the two end tabs on both of the die cuts. Glue the un-tabbed piece onto the tabbed piece, taking care to line up the centre score lines as this is the edge of the top of the box. Glue the other flat edge to the tabs. You will now have a box shape. 5. On the long pieces with the curve… add a bit of Tear & Tape to the unstamped side of the folded triangles. Fold the two end pieces into the box first. Fold the other two pieces down, and flatten the box. When you do this, the taped triangles will glue themselves into position. Open the box again, and the tabs should move into place. This is the bottom of the box. 6. Turn the box over. Fold the long straight edges down. You should have two triangles at the ends that can fold over the sides, and fit inside the slot. 7. Stamp the sentiment from Verdant Garden onto a piece of scrap Whisper White cardstock in Terracotta Tile. Die cut with the appropriate die (see photo above). 8. Die cut the backing piece of the tag using the other tag die from the Perfect Parcels dies, and Terracotta Tile cardstock. Adhere this to the back of the sentiment and set aside. 9. Lastly, score the Terracotta Tile card stock at 1”, 2-1/2”, 4-5/8” & 6-1/8”. Run your bone folder across the folds. Glue the Woven Threads DSP on top and refold on the score lines. Wrap this around the box and glue together at the bottom.
Stella MacKay
Independent Demonstrator for Stampin' Up! since 2002.
Disclaimer
The content in this blog is the sole responsibility of Stella MacKay as an Independent Stampin’ Up! Demonstrator. The use of and content of classes, services or products offered is not endorsed by Stampin’ Up!
